Advertisement

Soviet Applied Mechanics

, Volume 16, Issue 4, pp 299–304 | Cite as

Two-dimensional problems in statics of flexible elastoplastic shells with holes under once- or cyclically applied loads

  • I. S. Chernyshenko
Article

Keywords

Elastoplastic Shell 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature Cited

  1. 1.
    I. N. Garashchuk and I. S. Chernyshenko, “Numerical analysis of the state of stress of a cylindrical shell with a circular hole,” Prikl. Mekh.,15, No. 6, 49–54, (1979).Google Scholar
  2. 2.
    A. N. Guz', I. S. Chernyshenko, and K. I. Shnerenko, Spherical Bottoms with Holes [in Russian], Naukova Dumka, Kiev (1970).Google Scholar
  3. 3.
    A. N. Guz', P. Z. Lugovoi, and N. A. Shul'ga, Conical Shells with Holes [in Russian], Naukova Dumka, Kiev (1976).Google Scholar
  4. 4.
    G. D. Del', L. A. Polinovskii, and L. G. Sungurova, “Stress distribution around holes in shells of boiler drums,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 4, 14–17 (1971).Google Scholar
  5. 5 .
    G. V. Kanova and L. M. Savel'ev, “Design of a cylindrical shell with a circular hole for elastoplastic deformation,” in: Problems of Strength of Aircraft Structural Elements [in Russian], Kuibyshev. Aviats. Inst., Kuibyshev (1974), pp. 58–65.Google Scholar
  6. 6.
    M. S. Kornishin, N. I. Dedov, and N. N. Stolyarov, “Flexure and stability of flexible plates and flat shells under external pressure within the elastoplastic range taking into account compressibility of the material, unloading, and load cyclicity,” in: Theory of Shells and Plates [in Russian], Sudostroenie, Leningrad (1975), pp. 326–328.Google Scholar
  7. 7.
    V. V. Moskvitin, Plasticity under Variable Loads [in Russian], Mosk. Univ., Moscow (1965).Google Scholar
  8. 8.
    Kh. M. Mushtari and K. Z. Galimov, Nonlinear Theory of Elastic Shells [in Russian], Tatknigoizdat, Kazan (1957).Google Scholar
  9. 9.
    L. A. Polinovskii, “Stress distribution around holes in thin-walled shells,” Izv. Tomsk. Politekh. Inst., No. 225, 69–72 (1972).Google Scholar
  10. 10.
    L. M. Savel'ev and Kh. S. Khazanov, “Elastoplastic strains in a cylindrical shell with a circular hole,” in: Theory of Shells and Plates [in Russian], Nauka, Moscow (1973), pp. 180–184.Google Scholar
  11. 11.
    A. N. Guz', I. S. Chernyshenko, V. N. Chekhov, et al., Cylindrical Shells with Holes [in Russian], Naukova Dumka, Kiev (1974).Google Scholar
  12. 12.
    I. S. Chernyshenko and G. K. Sharshukov, “Analyzing the elastoplastic state of shells of revolution under a cyclic load,” Probl. Prochn., No. 4, 99–102 (1976).Google Scholar

Copyright information

© Plenum Publishing Corporation 1980

Authors and Affiliations

  • I. S. Chernyshenko

There are no affiliations available

Personalised recommendations