Literature Cited
L. T. Berezhnitskii and V. M. Sadivskii, “Stress—strain state close to rigid acute-angled inclusions in a homogeneous anisotropic body,” Fiz.-Khim. Mekh. Mater.,11, No. 6, 55–62 (1975).
E. F. Burmistrov, “Stress concentrations around noncircular holes in bending thin plates,” Inzh. Sb.,30, 99–106 (1960).
S. G. Lekhnitskii, Anisotropic Plates [in Russian], GITTL, Moscow (1957).
V. V. Panasyuk, L. T. Berezhnitskii, and M. V. Delyavskii, “Flexure of thin plates with crack-type defects,” Dop. Akad. Nauk UkrRSR, Ser. A, No. 2, 144–148 (1975).
V. V. Panasyuk, L. T. Berezhnitskii, and M. V. Delyavskii, “Stress—strain state close to sharpended defects,” Fiz.-Khim. Mekh. Mater.,12, No. 4, 67–72 (1976).
V. V. Panasyuk, L. T. Berezhnitskii, and I. I. Trush, “Stress distribution around defects of the type of rigid acute-angled inclusions,” Probl. Prochn., No. 7, 3–9 (1972).
G. N. Savin, Stress Concentrations around Holes [in Russian], Gostekhizdat, Moscow-Leningrad (1951).
G. Si and G. Libovits, “Mathematical theory of brittle fracture,” in: Failure, G. Libovits (editor) [in Russian], Vol. 2, Moscow (1975), pp. 83–203.
A. G. Ugodchikov, M. I. Dlugach, and A. E. Stepanov, Solution of Boundary Problems on Digital and Analog Computers [in Russian], Vysshaya Shkola, Moscow (1970).
G. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Nauka, Moscow (1974).
S. Ya. Yarema and G. S. Krestin, “Stress distribution at crack vertex in an anisotropic plate,” Fiz. Khim. Mekh. Mater.,5, No. 6, 714–719 (1969).
Subrata Saha, Subrata Mukherjei, and Chi Chang Chao, “Concentrated forces in semi-infinite anisotropic media,” J. Compos. Mater., No. 6, 403–408 (1972).
M. L. Williams, “The bending stress distribution at the base of a stationary crack,” J. Appl. Mech.,28, No. 1, 78–82 (1961).
Additional information
Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR, L'vov. Translated from Prikladnaya Mekhanika, Vol. 14, No. 11, pp. 42–49, November, 1978.
Rights and permissions
About this article
Cite this article
Berezhnitskii, L.T., Sadivskii, V.M. & Onyshko, L.I. Flexure of anisotropic plates with cracks. Soviet Applied Mechanics 14, 1156–1161 (1978). https://doi.org/10.1007/BF00883251
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00883251