Literature Cited
T. Yokobori, Interdisciplinary Approach to Fracture and Strength of Solids, Gordon (1968).
V. S. Zarubin and A. A. Polyakov, “Model of nonisothermal plastic deformation of a polycrystalline material,” in: Thermal Stresses in Structural Elements [in Russian], No. 9, Naukova Dumka, Kiev (1970), pp. 233–265.
E. Krempl, “Cyclic plasticity: some properties of the hysteresis curve of structural metals at room temperature,” Trans. ASME, Ser. D, J. Basic Eng., No. 2, 317–323 (1971).
V. I. Kuneev and K. N. Rusinko, “Orthogonal loading of materials having differing resistances to extension and compression,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 90–98 (1971).
M. Ya. Leonov, “Elements of the analytical theory of plasticity,” Dokl. Akad. Nauk SSSR,205, No. 2, 303–306 (1972).
F. A. McClintock and A. S. Argon, Mechanical Behavior of Materials, Addison-Wesley (1966).
N. Mott, “Behavior of metals under the action of alternating stresses,” in: Dislocations and Mechanical Properties of Crystals [Russian translation], Moscow (1960), pp. 321–326.
A. Nádai, Theory of Flow and Fracture of Solids, McGraw-Hill (1950).
K. N. Rusinko and É. I. Blinov, “Analytical investigation of deformation for two-link trajectories of loading,” Prikl. Mekh.,7, No. 11, 52–58 (1971).
K. N. Rusinko and É. I. Blinov, “Analytical investigation of the stress-strain relation for an arbitrary loading trajectory,” Mekh. Polim., No. 6, 981–986 (1973).
K. N. Rusinko, A. E. Kalatinets, and S. S. Dreval', “The concept of slip in the theory of plasticity,” Prikl. Mekh.10, No. 1, 3–19 (1974).
J. Friedel, Dislocations, Addison-Wesley (1964).
R. W. K. Honeycombe, The Plastic Deformation of Metals, Edward Arnold (Publ.) Ltd. (1968).
Additional information
L'vov Polytechnic Institute. Ukrainian Institute of Water-Management Engineers, Rovno. Translated from Prikladnaya Mekhanika, Vol. 12, No. 5, pp. 3–10, May, 1976.
Rights and permissions
About this article
Cite this article
Rusinko, K.N., Kalatinets, A.E. Complicated alternating deformation of elastoplastic bodies. Soviet Applied Mechanics 12, 433–438 (1976). https://doi.org/10.1007/BF00882446
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00882446