Abstract
Slag condensation in rapidly cooled coal combustion products has been simulated, and it has been found that binary nucleation affects the condensation considerably under certain conditions.
Similar content being viewed by others
Literature cited
A. V. Nedospasov, L. P, Poberezhskii, and Yu. G. Chernov, Body Compositions and Properties in Open-Type MHD Generators [in Russian], Moscow (1980).
F. F. Abraham, Homogeneous Nucleation Theory, New York (1974).
D. I. Zhukhovitskii, A. G. Khrapak, and I. T. Yakubov, Teplofiz. Vys. Temp.,21, No. 6, 1197–1205 (1983).
H. Flood, Z. Physiol. Chem.,A170, No. 3/4, 286–294 (1934).
D. Stauffer, J. Aerosol Sci.,7, No. 4, 319–333 (1976).
F. E. Spencer, J. C. Hendrie, and D. Bienstock, Sixth International Conference on Magnetohydrodynamic Electrical Power Generation, Vol. 2 (1975), pp. 181–210.
A. A. Zhukkovitskii and L. A. Shvartsman, Physical Chemistry [in Russian], Moscow (1976).
L. V. Gurvich, I. V. Veits, V. A. Medvedev, et al., Thermodynamic Parameters of Pure Substances [in Russian], Moscow (1981).
A. G. Morachevskii (ed.), Handbook on Molten Salts, Vol. 2 [in Russian], Leningrad (1972).
I. B. Bobylev and V. N. Anfilogov, Izv. AN SSSR, Metallurgiya, No. 6, 37–44 (1983).
I. B. Sladkov, Methods of Estimating Physicochemical Parameters for Covalent Inorganic Compounds [in Russian], Leningrad (1978).
V. M. Batenin, R. R. Grigor'yants, et al., Methods of Prepating Fuel and Designing Combustion Chambers for MHD Power Systems Based on Coal: Proceedings of the International Conference, Alma Ata, October 1982 [in Russian], Moscow (1984).
A. G. Merzhanov, M. M. Kitain, U. I. Gol'dshleger, and A. S. Shteinberg, Dokl. AN SSSR,237, No. 2, 391–394 (1977).
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhunal, Vol. 58, NO. 4, pp. 604–610, April 1990.
Rights and permissions
About this article
Cite this article
Berezhkovskii, L.M., Zitserman, V.Y. Slag-droplet binary-condensation kinetics in a rapidly cooled flow of coal combustion products. Journal of Engineering Physics 58, 453–457 (1990). https://doi.org/10.1007/BF00877353
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00877353