Abstract
A model is used for three-stage hot pressing, which is based on the effective characteristics for the porous cold-pressed blanks and is used to optimize the process as a whole.
Similar content being viewed by others
Literature cited
V. V. Skorokhod and S. M. Solonin, The Physical and Metallurgical Principles of Powder Sintering [in Russian], Moscow (1984).
V. B. Glasko, Inverse Treatments in Mathematical Physics [in Russian], Moscow (1984).
A. N. Tikhonov and V. Ya. Arsenin, Methods of Solving Ill-Posed Problems [in Russian], Moscow (1979).
E. A. Vishnevskaya, V. B. Glasko, M. K. Trubetskov, and S. G. Popov, Inzh.-Fiz. Zh.,50, No. 5, 835–839 (1986).
Yu. G. Dorofeev, Dynamic Hot Pressing for Porous Powder Blanks [in Russian], Moscow (1977).
A. S. Leonov, Dokl. Akad. Nauk SSSR,262, No. 6, 1306–1310 (1982).
F. P. Vasil'ev, Methods of Solving Turning-Point Problems [in Russian], Moscow (1981).
B. N. Pshenichnyi and Yu. M. Danilin, Numerical Methods in Turning-Point Problems [in Russian], Moscow (1975).
D. Himmelblau, Applied Nonlinear Programming [Russian translation], Moscow (1975).
V. B. Glasko, N. I. Kulik, A. N. Tikhonov, and I. N. Shklyarov, Zh. Vychisl. Mat. Mat. Fiz.,19, No. 3, 768–774 (1979).
G. Greber, S. Erk, and U. Griguos, The Principles of Heat Transfer [Russian translation], Moscow (1958).
A. A. Samarskii, Difference-Scheme Theory [in Russian], Moscow (1983).
N. N. Kalitkin, Numerical Methods [in Russian], Moscow (1978).
G. N. Dul'nev and Yu. P. Zarichnyak, The Thermal Conductivities of Mixtures and Composites (Handbook) [in Russian], Leningrad (1974).
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 57, No. 1, pp. 85–90, July, 1989.
Rights and permissions
About this article
Cite this article
Glasko, V.B., Demina, I.V., Zastrozhnov, S.I. et al. Optimizing hot pressing for cold-pressed porous blanks. Journal of Engineering Physics 57, 798–803 (1989). https://doi.org/10.1007/BF00870793
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00870793