Abstract
The possibility of determining the moisture and temperature gradients in real wet solids of irregular shape, inhomogeneous composition, etc. by simplified engineering methods is described.
Similar content being viewed by others
References
A. V. Luikov, Drying Theory [in Russian], Moscow (1968).
M. Urošević, Doctoral Thesis, Technological Department, Novi Sad (1986).
G. Kanevče, Doctoral Thesis, Technological Department, Novi Sad (1981).
M. Stefanović and S. Nešiś, ITE method for determining drying kinetics of solid granular materials, Cambridge, Massachusets, USA, Drying-86, Vol. 1, (1986), pp. 256–268.
G. Šorak, Master's Thesis, Mechanical Engineering Department, Belgrade (1989).
D. Bhattacharyya and D. C. T. Pei, Heat transfer in fixed bag gas-solid systems, Chem. Eng. Sci. (Great Britain),30, 293–300 (1975).
N. Wakao and S. Kaguei, Heat and Mass Transfer in Packed Beds, Gordon and Breach, New York (1982).
D. Kunii and O. Levenspeil, Fluidization Engineering, R. E. Krieger, New York (1977).
S. Petović, Doctoral Thesis, Mechanical Engineering Dept, Belgrade (1992).
M. Stefanović and M. Urošević. The Relation between Drying Dynamics and Technology [in Russian], Preprint No. 30, Heat and Mass Transfer Institute, Acad. Sci. BSSR, Minsk (1989).
Additional information
Institute of Nuclear Sciences Vinča, Laboratory of Thermal Engineering and Power, Mechanical Engineering Faculty, Belgrade University, Yugoslavia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 1, pp. 87–92, January, 1994.
Rights and permissions
About this article
Cite this article
Stefanović, M., Voronets, D. A method for determination of parameters of wet solids in the drying process. J Eng Phys Thermophys 66, 79–84 (1994). https://doi.org/10.1007/BF00862969
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00862969