Abstract
Results of use of SHS materials as refractory mortars for the lining of ferrous metallurgy units are presented. It is shown that using Termok-3 SHS mortars increases substantially the durability of the linings of units operating in a medium of both basic and acidic slags.
Similar content being viewed by others
References
K. Asan, H. Oba, H. Kida, et al., Refractories and Linings [Russian translation], Moscow (1976).
Y. Inamura (ed.), Refractories and Their Application [Russian translation], Moscow (1984).
M. N. Kaibicheva, Linings of Electric Furnaces [in Russian], Moscow (1975).
K. K. Strelov, I. D. Kashcheev, et al., Refractory Technology [in Russian], Moscow (1988).
Refractories and Refractory Articles [in Russian], State Standard of the USSR, Part 2, Moscow (1983).
G. I. Ksandopulo, M. B. Ismailov, A. R. Seidaev, et al., A Method of Producing a Refractory, International Application PCT/89/00118, Published December 7, 1990.
Termok-3 SHS Mortars. Specifications TU 4553359-1-89 (Experimental Batch), Ministry of Education of the Kazakh SSR and Kazakh Metallurgy Science and Technology Center for SHS, Alma-Ata (1989).
Refractory Lining of Units and Parts in Steel Production Using Termok-3MP SHS Mortar, Operating Instruction TI8-3-90, Ministry of Education of the Kazakh SSR and Kazakh Metallurgy Science and Technology Center for SHS, Alma-Ata (1990).
Additional information
Institute of Combustion Problems, Almaty, Kazakhstan. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 65, No. 5, pp. 623–626, November, 1993.
Rights and permissions
About this article
Cite this article
Seidaev, A.R., Ismailov, M.B., Ksandopulo, G.I. et al. Use of SHS refractories for the lining of ferrous metallurgy units. J Eng Phys Thermophys 65, 1143–1145 (1993). https://doi.org/10.1007/BF00862051
Issue Date:
DOI: https://doi.org/10.1007/BF00862051