Abstract
In the SHS production of refractory materials (concretes, coating mixtures) the basic problem is overcoming the scale factor. This is done by imparting a granular structure to the mass being synthesized. Requirements for the granular and chemical composition of the filler are obtained.
Similar content being viewed by others
References
S. R. Zamyatin and L. A. Babkina, Refractories, Third Scientific Conf. on Unformed Refractories [in Russian], No. 4, 60–67 (1988).
Y. Inamura, Refractories and their Application [Russian translation], Moscow (1984).
K. Asai, H. Oba, H. Kida, et al., Refractories and Linings [Russian translation], Moscow (1976).
S. P. Zamyatin, A. K. Purgin, L. B. Khoroshavin, et. al., Refractory Concretes [in Russian], Moscow (1982).
K. K. Strelov and I. D. Kashcheev, Monitoring of the Refractory Production Process [in Russian], Moscow (1986).
Additional information
Institute of Combustion Problems, Almaty, Kazakhstan. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 65, No. 5, pp. 610–612, November, 1993.
Rights and permissions
About this article
Cite this article
Ismailov, M.B., Gabayev, Z.A. SHS of refractory materials. J Eng Phys Thermophys 65, 1131–1133 (1993). https://doi.org/10.1007/BF00862048
Issue Date:
DOI: https://doi.org/10.1007/BF00862048