Polymer Mechanics

, Volume 8, Issue 2, pp 260–265 | Cite as

Effect of the substrate on the strength of adhesive-bonded joints

  • V. E. Basin
  • A. A. Berlin
Article
  • 19 Downloads

Abstract

The possibility of the adhesion failure of adhesives is discussed. It is shown that the properties of the adhesive film depend on the physicomechanical characteristics of the substrate as a result of the action of molecular forces.

Keywords

Adhesive Film Adhesion Failure Molecular Force Physicomechanical Characteristic 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    J. J. Bikerman, The Science of Adhesive Joints, Academic Press (1968).Google Scholar
  2. 2.
    J. J. Bikerman, Vysokomolek. Soed.,A10, 974 (1968).Google Scholar
  3. 3.
    S. S. Voyutskii, Kauchuk i Rezina,11, 63 (1961).Google Scholar
  4. 4.
    S. S. Voyutskii, Mekh. Polim., No. 5, 728 (1966).Google Scholar
  5. 5.
    V. E. Basin and A. A. Berlin, Zh. Vses. Khim. Obshch.,14, 1, 19 (1969); Mekhan. Polim., No. 5, 840 (1969).Google Scholar
  6. 6.
    A. A. Berlin and V. E. Basin, Principles of the Adhesion of Polymers [in Russian], Khimiya (1969).Google Scholar
  7. 7.
    V. M. Luk'yanovich, Electron Microscopy in Physicochemical Investigations [in Russian], Izd. AN SSSR (1960).Google Scholar
  8. 8.
    H. D. Keith, in: Physics and Chemistry of the Organic Solid State (edited by D. Fox, M. M. Labes, and A. Weissberger), Wiley (1963–1967).Google Scholar
  9. 9.
    P. F. Geil, Polymeric Single Crystals,(Interscience) Wiley (1963).Google Scholar
  10. 10.
    A. Cobbold, R. Daubeny, K. Deutsch, and R. Markey, Nature,172, 806 (1953).Google Scholar
  11. 11.
    C. Bunn, A. Cobbold, and K. Palmer, J. Polym. Sci.,28, 365 (1958).Google Scholar
  12. 12.
    E. Spear, Coll. Symp. Monograph.,1, 321 (1923).Google Scholar
  13. 13.
    W. Hardy and M. Nottage, Proc. Roy. Soc.,A112, 62 (1926);A118, 209 (1928);A138, 259 (1932).Google Scholar
  14. 14.
    J. McBain and G. Hopkins, J. Phys. Chem.,29, 118 (1925);30, 114 (1926).Google Scholar
  15. 15.
    P. A. Rebinder and V. P. Margaritov, Zh. Rezin. Prom.,12, 991 (1935).Google Scholar
  16. 16.
    P. A. Rebinder, Zh. Vses. Khim. Obshch.,8, 162 (1963).Google Scholar
  17. 17.
    B. V. Deryagin and N. A. Krotova, Adhesion [in Russian], Izd. AN SSSR (1949).Google Scholar
  18. 18.
    G. Hass (editor), Physics of Thin Films, Academic Press (1963).Google Scholar
  19. 19.
    L. S. Palatnik and N. I. Papirov, Directional Crystallization [in Russian], Metallurgiya (1964).Google Scholar
  20. 20.
    E. W. Fischer and H. A. Stuart, J. Polym. Sci.,34, 721 (1959).Google Scholar
  21. 21.
    J. A. Koutsky, A. G. Walton, and E. Baer, J. Polym. Sci.,B5, 2, 177 (1967);A4, 4, 611 (1966).Google Scholar
  22. 22.
    K. Kiss, S. H. Carr, A. G. Walton, and E. Baer, J. Polym. Sci.,B5, 12, 1087 (1967).Google Scholar
  23. 23.
    H. Seifert, Koll. Ztschr. u. Ztschr. Polym.,224, 2, 97 (1968); J. Phys. a Chem. Sol.,1, 543 (1967).Google Scholar
  24. 24.
    J. P. Luongo and H. Schonhorn, Amer. Chem. Soc. Polym. Prepr.,9, 1, 197 (1968); J. Polym. Sci.,6, A2, 9, 1649 (1968).Google Scholar
  25. 25.
    H. Schonhorn, J. Polym. Sci.,B2, 4, 465 (1964);B5, 10, 919 (1967).Google Scholar
  26. 26.
    V. A. Kargin, T. I. Sogolova, and T. K. Shaposhnikova, Dokl. Akad. Nauk SSSR,180, 901 (1968)Google Scholar
  27. 27.
    P. S. Pol'sman, L. V. Ginzburg, M. F. Bukhina, A. S. Kuz'minskii, V. G. Kalshnikova, and Z. Ya. Berestneva, Vysokomolek. Soed.,B10, 404 (1968).Google Scholar
  28. 28.
    Yu. M. Malinskii, T. T. Orlovskaya, and V. A. Kargin, Dokl. Akad. Nauk SSSR,160, 1128 (1965).Google Scholar
  29. 29.
    Yu. M. Malinskii, Vysokomolek. Soed.,A10, 2662 (1968).Google Scholar
  30. 30.
    Yu. M. Malinskii, I. V. Épel'baum, N. M Titova, and V. A. Kargin, Vysokomolek. Soed.,A10, 786 (1968).Google Scholar
  31. 31.
    Yu. M. Malinskii, I. V. Épel'baum, L. I. Ivanova, G. V. Vinogradov, and V. A. Kargin, Vysokomolek. Soed.,8, 1886 (1966).Google Scholar
  32. 32.
    Yu. M. Malinskii and I. V. Épel'baum, Vysokomolek. Soed.,B9, 500 (1967).Google Scholar
  33. 33.
    P. I. Zubov, M. R. Kiselev, and L. A. Sukhareva, Dokl. Akad. Nauk SSSR,176, 336 (1967); Kolloidn. Zh.,30, 827 (1968).Google Scholar
  34. 34.
    P. I. Zubov, V. A. Voronkov, and L. A. Sukhareva, Vysokomolek. Soed.,B10, 92 (1968);A11, 407 (1969).Google Scholar
  35. 35.
    A. N. Kuksin, L. M. Sergeeva, Yu. S. Lipatov, and L. I. Bezruk, Vysokomolek. Soed.,A12, 2332 (1970).Google Scholar
  36. 36.
    H. Westlinning, G. Butenuth, and G. Leineweber, Macromol. Chem.,50, 1, 253 (1961).Google Scholar
  37. 37.
    K. A. Pechkovskaya, Carbon Black as a Reinforcing Material for Rubber [in Russian], Khimiya (1968).Google Scholar
  38. 38.
    G. I. Distler and M. P. Fedotova, Vysokomolek. Soed.,B9, 3 (1967).Google Scholar
  39. 39.
    G. I. Distler and S. A. Kobzareva, Investigation into the Region of Surface Forces [in Russian], Izd. AN SSSR (1967), p. 97.Google Scholar
  40. 40.
    R. N. Sheftal', Yu. F. Ogrin, V. N. Lutskii, and M. I. Elinson, Dokl. Akad. Nauk SSSR,180, 580 (1968).Google Scholar
  41. 41.
    Yu. S. Lipatov, Physical Chemistry of Filled Polymers [in Russian], Kiev (1967).Google Scholar
  42. 42.
    Yu. S. Lipatov and F. G. Fabulyak, Vysokomolek. Soed.,A10, 1605 (1968);A11, 708 (1969).Google Scholar
  43. 43.
    Yu. S. Lipatov and V. F. Babich, Vysokomolek. Soed.,B10, 848 (1968); Mekhan. Polim., No. 3, 548 (1969); Lakokras. Materialy i Ikh Primenenie, 3, 45 (1970).Google Scholar
  44. 44.
    L. M. Sergeeva, Yu. S. Lipatov, and N. I. Bin'kevich, Vysokomolek. Soed.,A9, 2672 (1967).Google Scholar
  45. 45.
    Surface Phenomena in Polymers [in Russian], Kiev (1970).Google Scholar
  46. 46.
    E. B. Trostyansksya, M. I. Gol'dberg, and A. A. Chernikov, Vysokomolek Soed.,A12, 2109 (1970).Google Scholar
  47. 47.
    E. B. Trostyanskaya, M. I. Gol'dberg, V. V. Berezovskii, and A. A. Chernikov, Materials of Seminar "Deposition of Metal Coatings on Nonmetallic Materials by Chemical and Electrochemical Methods" [in Russian], MDNTP im. Dzerzhinskogo, Collection 1 (1970), p. 64.Google Scholar
  48. 48.
    H. Schonhorn and F. W. Ryan, J. Polym. Sci.,6, A2, 231 (1968).Google Scholar
  49. 49.
    E. B. Trostyanskaya and A. M. Poimanov, Mekhan. Polim., No. 3, 8; No. 5, 58 (1965).Google Scholar
  50. 50.
    A. M. Poimanov, A. R. Bel'nik, V. A. Zakharov, and V. I. Sakharov, Mekhan. Polim., No. 4, 677 (1968).Google Scholar
  51. 51.
    A. M. Poimanov, E. B. Trostyanskaya, E. F. Nosov, and A. R. Bel'nik, Mekhan. Polim., No. 1, 54 (1970); No. 6, 1018 (1969).Google Scholar
  52. 52.
    Yu. E. Kornilovich, Investigation of the Strength of Solutions and Concretes [in Russian], Kiev (1960).Google Scholar
  53. 53.
    V. G. Mikul'skii and L. A. Igonin, Adhesion of Concrete in Structures [in Russian], Stroiizdat (1965).Google Scholar
  54. 54.
    N. B. Ur'ev and N. V. Mikhailov, Colloidal Cement Adhesive and Its Use in Construction [in Russian], Stroiizdat (1967).Google Scholar
  55. 55.
    V. A. Presnov, Yu. B. Novodvorskii, and M. P. Yakubenya, Principles of the Technology and Physics of Soldering [in Russian], Tomsk (1961).Google Scholar
  56. 56.
    V. E. Basin, Candidate's Dissertation, Moscow (1962).Google Scholar
  57. 57.
    B. Z. Kamenskii, M. M. Reznikovskii, and E. G. Vostroknutov, Kauchuk i Rezina,1, 35 (1966).Google Scholar
  58. 58.
    E. G. Vostroknutov, B. Z. Kamenskii, and Kh. É. Malkina, Renovation of Tires [in Russian], Goskhimizdat (1965).Google Scholar
  59. 59.
    S. N. Lotsmanov and I. E. Petrunin, Soldering of Metals [in Russian], Mashinostroenie (1966).Google Scholar
  60. 60.
    S. A. Golovanenko and L. V. Meandrov, Production of Bimetals [in Russian], Metallurgiya (1966).Google Scholar
  61. 61.
    N. F. Kazakov, Diffusion Welding under Vacuum [in Russian], Mashinostroenie (1968).Google Scholar
  62. 62.
    M. L. Lyubimov, Joining Glass to Metal [in Russian], Énergiya (1968).Google Scholar
  63. 63.
    J. M. Black and R. F. Blomquist, Ind. Engng. Chem.,50, 918 (1958).Google Scholar
  64. 64.
    H. Levine, Ind. Engng. Chem.,54, 3, 22 (1962).Google Scholar
  65. 65.
    V. A. Belyi, N. I. Egorenkov, and Yu. M. Pleskachevskii, Vysokomolek. Soed.,B12, 643 (1970).Google Scholar
  66. 66.
    N. I. Moskvitin, Physicochemical Principles of the Processes of Adhesion [in Russian], Lesnaya Promyshlennost' (1965).Google Scholar
  67. 67.
    L. I. Golubenkova, A. N. Shabadash, S. N. Nikonova, and M. S. Akutin, Vysokomolek. Soed.,4, 1354 (1962); Plast. Massy,2, 27 (1966).Google Scholar
  68. 68.
    M. G. Voronkov, E. A. Lasskaya, and A. A. Pashchenko, Zh. Prikl. Khim.,38, 1483 (1965).Google Scholar
  69. 69.
    High-Strength Oriented Glass-Fiber-Reinforced Plastics [in Russian], Nauka (1966).Google Scholar
  70. 70.
    C. H. Hofrichter and A. D. McLaren, Ind. Engng. Chem.,40, 329 (1948).Google Scholar
  71. 71.
    A. F. Lewis and J. Forrestal, in: Recent Development of Adhesion Science, ASTM Spec. Techn. Publ. No. 360 Philadelphia (1963), p. 59.Google Scholar

Copyright information

© Consultants Bureau 1974

Authors and Affiliations

  • V. E. Basin
  • A. A. Berlin

There are no affiliations available

Personalised recommendations