Compression curve of a fibrous composite

  • S. T. Mileiko
  • A. A. Khvostunkov
Article
  • 25 Downloads

Abstract

Results are presented of an experimental investigation of a single-directional fibrous composite under compression in the bonding direction. The buckling modesare detected: the customary bending and a shear mode which holds for comparatively low sample flexibilities.

Keywords

Mathematical Modeling Mechanical Engineer Experimental Investigation Industrial Mathematic Shear Mode 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    B. W. Rosen, “Mechanics of composite strengthening.” Fiber Composite Mater., Amer. Soc. Metals, Ohio (1965).Google Scholar
  2. 2.
    W.-Y. Chung and R. B. Testa, “The elastic stability of fibers in a composite plate,” J. Composite Mater.,3, No. 1 (1969).Google Scholar
  3. 3.
    E. M. Ferran and B. Harris, “Compression strength of polyester resin reinforced with steel wires,” J. Composite Mater.,4, No. 1 (1970).Google Scholar
  4. 4.
    M. R. Pinnel and A. Lawley, “Correlation of uniaxial yielding and substructure in aluminum-stainless steel composites,” Metall. Trans.,1, No. 5 (1970).Google Scholar
  5. 5.
    B. P. Makarov and G. V. Arutyunyan, “On the influence of random curvatures of the armature on the physicomechanical characteristics of composites,” Trudy Moskovsk. Énerg. In-ta, No. 74 (1970).Google Scholar
  6. 6.
    Yu. N. Rabotnov, Strength of Materials [in Russian], Fizmatgiz, Moscow (1962).Google Scholar
  7. 7.
    R. Hill, “Elastic properties of reinforced solids: some theoretical principles,” J. Mech. Phys. Solids,11, No. 5 (1963).Google Scholar
  8. 8.
    A. Kelly and H. Lilholt, “Stress-strain curve of a fibre-reinforced composite,” Phil. Mag.,20, No. 164 (1969).Google Scholar

Copyright information

© Consultants Bureau 1974

Authors and Affiliations

  • S. T. Mileiko
    • 1
  • A. A. Khvostunkov
    • 1
  1. 1.Moscow

Personalised recommendations