Literature cited
V. N. Mazalov and Yu. V. Nemirovskii, “The dynamics of thin-walled plastic structures,” in: Mechanics, New Developments in Foreign Science, No. 5, Problems of the Dynamics of Elastoplastic Media [Russian translation], Mir, Moscow (1975).
E. W. Parkes, “Some simple experiments on the dynamic plastic behaviour of mild-steel beams,” Brit. Weld. J.,3, No. 8, 36 (1956).
I. J. Mentel, “The plastic deformation due to impact of a cantilever beam with an attached tip mass,” J. Appl. Mech.,25, No. 4, 515–524 (1958).
A. L. Florence, “Circular plate under a uniformly distributed impulse,” Int. J. Solids Struct.,2, No. 1, 37–47 (1966).
A. Sawczuk and M. Duszek, “A note on the interaction of shear and bending in plastic plates,” Arch. Mech. Stosow.,15, No. 3, 411–426 (1963).
N. P. Zhuk and O. N. Shablii, “The limiting equilibrium of shells of revolution and circular plates with shear stresses taken into account,” Prikl. Mekh.,8, No. 7 (1972).
N. P. Zhuk and O. N. Shablii, “The limiting equilibrium of a circular plate with the shear stresses taken into account,” Prikl. Mekh.,9, No. 6 (1973).
G. S. Shapiro, “The yield surfaces for ideally plastic shells,” in: Problems of the Mechanics of a Continuous Medium [in Russian], Izd. Akad. Nauk SSSR, Moscow (1961).
W. Wang and G. Hopkins, “The plastic deformation of a circular plate fixed along the edge under the action of an impulse load,” in: Mekhanika [Periodic Collection of Translations of Foreign Articles], No. 3 (1955).
Author information
Authors and Affiliations
Additional information
Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 2, pp. 124–133, March–April, 1978.
Rights and permissions
About this article
Cite this article
Nemirovskii, Y.V., Skovoroda, A.R. Dynamic deflection of stiffly plastic restrained circular plates with the effects of shear and rotational inertia taken into account. J Appl Mech Tech Phys 19, 239–246 (1978). https://doi.org/10.1007/BF00850043
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00850043