References
V. L. Biderman, Mechanics of Thin-Walled Structures. Statics [in Russian], Mashinostroenie, Moscow (1977).
Yu. M. Volchkov and S. N. Korobeinikov, “Estimating the limiting load of elastoplastic shells of revolution,” Zh. Prikl. Mekh. Tekh. Fiz., No. 4, 146–150 (1981).
Ya. M. Grigorenko and N. N. Kryukov, Numerical Solution of Statics Problems Involving Flexible Laminar Shells with Variable Parameters [in Russian], Naukova Dumka, Kiev (1988).
V. S. Gudramovich, Stability of Elastoplastic Shells [in Russian], Naukova Dumka, Kiev (1987).
A. P. Gusenkov, B. M. Meerson, and G. V. Moskvitin, “Method of estimating the SSS and low-cycle strength of metal-hose shells with helical corrugation,” Probl. Mashinostr. Nadezhn. Mash., No. 5, 39–43 (1990).
A. P. Gusenkov, G. V. Moskovitin, and V. N. Khoroshilov, Low-Cycle Strength of Shell Structures [in Russian], Nauka, Moscow (1989).
N. A. Lobkova, “Stress-strain state of a tube with helical corrugation,” Prikl. Mekhan.,24, No. 2, 118–121 (1988).
B. M. Meerson, Stress-Strain State of a Helical Shell [in Russian], Ufimsk Aviation Institute (1988); Paper 5593-V88 Deposited at VINITI (1988).
V. A. Merzlyakov, “Thermoelastoplastic strain of shells of revolution under a nonaxisymmetric load,” Prikl. Mekh.,26, No. 11, 70–76 (1990).
V. A. Merzlyakov, “Thermoelastoplastic stress-strain state of shells of revolution, taking account of torsion,” Probl. Prochn., No. 2, 88–92 (1985).
L. A. Il'in, N. A. Lobkova, A. O. Los', N. P. Starikov, and E. I. Yaroshchenko, “Approximate method of calculating a tube with helical corrugation,” Prikl. Mekh.,19, No. 9, 27–31 (1983).
Yu. N. Shevchenko, M. E. Babeshko, V. A. Merzylakov, A. O. Los', N. P. Starikov, and P. S. Yukhimets, “Approximate calculation of elastoplastic stress-strain state of a tube with helical corrugation,” Probl. Prochn., No. 1, 82–86 (1988).
Yu. N. Shevchenko, M. E. Babeshko, V. V. Piskun, and V. G. Savchenko, Three-Dimensional Thermoplasticity Problems [in Russian], Naukova Dumka, Kiev (1980).
N. A. Lobkova, A. O. Los', V. N. Novikov, and P. S. Yukhimets, “Stress-strain state of cylindrical shell with helical corrugation,” in: Proceedings of the Fourteenth All-Union Conference on the Theory of Plates and Shells [in Russian], Vol. 2, Izd. Tbil. Univ., Tbilisi (1987), pp. 139–144.
V. N. Novikov, A. O. Los', N. P. Starikov, L. A. Il'in, N. A. Lobkova, O. M. Ivantsov, M. A. Sidorkevich, and E. Yu. Burmenko, “Tubes with reduced rigidity for uncompensated installation of pipeline mains operating in considerable temperature gradients,” in: Multilayer Welded Structures and Tubes [in Russian], Naukova Dumka, Kiev (1984), pp. 232–239.
L. A. Shapovalov, “Simplest version of the equations of geometrically nonlinear thin-shell theory,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 1, 56–62 (1968).
Yu. N. Shevchenko and V. A. Merzlyakov, “Thermoelastoplastic nonaxisymmetric deformation of shells of revolution,” Prikl. Mekh.,24, No. 5, 43–53 (1988).
Yu. N. Shevchenko and R. G. Terekhov, Physical Equations of Thermoviscoplasticity [in Russian], Naukova Dumka, Kiev (1982).
A. P. Gusenkov, A. O. Los', P. S. Yukhimets, G. V. Moskvitin, and M. F. Fokin, “Low-cycle strength of elements of thermal networks based on self-compensating tubes,” Mashinovedenie, No. 5, 18–25 (1989).
A. P. Gusenkov, M. F. Fokin, A. O. Los', G. V. Moskvitin, P. S. Yukhimets, and R. R. Edikhanov, “Stress-strain state and low-cycle strength of self-compensating tubes,” Mashinovedenie, No. 1, 27–34 (1988).
P. S. Yukhimets, Ensuring Adequate Working Life of Self-Compensating Pipelines for Thermal Networks on the Basis of Strength Testing under Low-Cycle Loads, Author's Abstract of Candidate's Dissertation, Kiev (1992).
A. Yoshida, “The stress in a helical corrugated tube under axial tension,” Bull. ISME,9, No. 36, 654–666 (1966).
Additional information
S. P. Timoshenko Institute of Mechanics, Ukrainian Academy of Sciences, Kiev. Translated from Prikladnaya Mekhanika, Vol. 30, No. 6, pp. 42–51, June, 1994.
Rights and permissions
About this article
Cite this article
Merzlyakov, V.A. Approximate method of calculating the elastoplastic deformation of shells with helical corrugation. Int Appl Mech 30, 433–440 (1994). https://doi.org/10.1007/BF00847347
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00847347