Literature cited
R. V. Minakova, R. F. Voitovich, A. A. Flis, et al., “Some high-temperature properties of alloyed pseudoalloys,” Poroshk. Metall., No. 9, 35–38 (1978).
R. M. German, “Diffusion activated sintering densification, microstructure and mechanical properties,” Int. J. Powder Met. and Powder Technol.,19, No. 4, 277–278, 280–282, 284–287 (1983).
V. N. Eremenko, R. V. Minakova, and M. M. Churakov, “Solubility of tungsten in coppernickel melts,” Poroshk. Metall., No. 4, 53–58 (1977).
Yu. V. Naidich, I. A. Lavrinenko, and V. A. Evdokimov, “Liquid-phase sintering under pressure of tungsten-nickel-copper composites,” Poroshk. Metall., No. 4, 43–49 (1977).
S. E. Kazharskaya, E. M. Rabinovich, Z. G. Soboleva, et al., “The effect of technological parameters on the structure of sintered tungsten-copper-nickel powders,” in: Diffusion Processes in Metals, Tul'skii Politekhnicheskii Institut, Tula (1977), pp. 54–61.
O. N. Shivrin and L. V. Supranenok, “Intermetallic phases forming in the system Ni-W during sintering of powdered compacts,” Izv. Akad. Nauk SSSR, Met., No. 1, 138–140 (1980).
Z. G. Soboleva, M. M. Kalina, V. N. Gorokhov, et al., “The effect of the heat treatment regime on the distribution of copper-nickel binder and on the mechanical properties of tungsten base alloys,” in: Diffusion Processes in Metals, Tul'skii Politekhnicheskii Institut, Tula (1986), pp. 146–150.
V. V. Skorokhod and S. M. Solonin, The Physicometallurgical Fundamentals of the Sintering of Powders [in Russian], Metallurgiya, Moscow (1984).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(329), pp. 80–83, May, 1990.
Rights and permissions
About this article
Cite this article
Kalina, M.M., Soboleva, Z.G., Gorokhov, V.N. et al. Structure and mechanical properties of W-Ni-Cu pseudoalloys. Powder Metall Met Ceram 29, 406–409 (1990). https://doi.org/10.1007/BF00844966
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00844966