Abstract
The effectiveness of the fluctuation method of determining the mixing coefficient D as well as the feasibility of automating the measurements and the subsequent data evaluation are confirmed experimentally on a “one-grain-thick” model.
Similar content being viewed by others
Literature cited
W. Brötz, Chem. Ing. Techn.,24, No. 2, 57 (1952).
M. Leva and M. Grummer, Chem. Engr. Progr.,48, 307 (1952).
L. Massimilla and S. Bracale, Ris. Sci.,27, No. 5, 1509 (1957).
V. F. Frolov and P. G. Romankov, Zh. Prikl. Khim.,35, No. 10, 2220 (1962).
A. K. Bondareva, V. I. Grigor'eva, and O. M. Todes, Dokl. Akad. Nauk SSSR,152, No. 2, 386 (1963).
K. S. Sutherland, Trans. Inst. Chem. Engr.,39, No. 3, 188 (1960).
M. B. Grinbaum and O. M. Todes, Élektrotermiya, No. 44 (1965).
S. Singer, D. B. Todd, and V. P. Guinn, Industr. Eng. Chem.,49, 11 (1957).
M. É. Aérov and O. M. Todes, Hydrodynamic and Thermal Principles in the Operation of Apparatus with a Stationary and a Fluidized Granular Bed [in Russian], Chap. 9, Khimiya (1968).
O. M. Todes, A. K. Bondareva, and M. B. Grinbaum, Khim. Promyshl.,42, No. 6, 408 (1966).
O. M. Todes, A. K. Bondareva, É. L. Bogomaz, and M. B. Grinbaum, in: High-Temperature Endothermal Processes in a Fluidization Bed [in Russian], Metallurgiya (1968), p. 87.
O. M. Todes, A. K. Bondareva, L. S. Sheitiina, É. L. Bogomaz, I. I. Petrenko, and V. P. Skvortsov, in: Study of Heat- and Mass-Transfer Processes in a Fluidization Bed [in Russian], Ivanovo (1969), p. 122.
O. M. Todes, Dokl. Akad. Nauk SSSR,189, No. 3, 521 (1969).
O. M. Todes, É. L. Bogomaz, A. K. Bondareva, L. S. Sheinina, I. I. Petrenko, and V. P. Skvortsov, Khim. Promyshl.,47, No. 7, 535 (1971).
Yu. A. Buevich, Inzh.-Fiz. Zh.,14, No. 3, 454 (1968).
I. I. Petrenko, V. P. Skvortsov, and O. M. Todes, Zavod. Lab.,33, No. 2, 188 (1967).
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 22, No. 4, pp. 589–596, April, 1972.
Rights and permissions
About this article
Cite this article
Todes, O.M., Sheinina, L.S. Fluctuation method of determining the mixing coefficient for a solid phase in a two-dimensional fluidization bed model. Journal of Engineering Physics 22, 401–406 (1972). https://doi.org/10.1007/BF00829425
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00829425