Abstract
The heat-trans fer characteristics with evaporation and boiling of a liquid in porous evaporators when power is introduced under boundary conditions of the third kind are examined in this work.
Similar content being viewed by others
Literature cited
V. I. Tolubinskii, V. A. Antonenko, and Yu. N. Ostrovskii, “Heat-transfer mechanism and characteristics of vaporization in the evaporation zone of a heat pipe,” Izv. Akad. Nauk SSSR, Energ. Transport, No. 1, 141–148 (1979).
V. A. Dyundin, G. N. Danilova, and A. V. Borishanskaya, “Heat transfer with boiling of refrigerants on surfaces of porous coatings,” in: Heat Transfer and Hydrodynamics [in Russian], Nauka, Leningrad (1977), pp. 15–30.
A. P. Ornatskii, M. G. Semena, and V. I. Timofeev, “Experimental investigation of maximum heat fluxes on flat metal fiber wicks under typical conditions in heat pipes,” Inzh.-Fiz. Zh.,5, No. 5, 782–788 (1978).
V. A. Afanas'ev and B. F. Smirnov, “Investigation of heat transfer and limiting heat fluxes with boiling in capillary porous structures,” Teploenergetika, No. 5, 65–67 (1979).
A. Abkhat and R. Seban, “Boiling and evaporation of water, acetone, and ethyl alcohol in heat pipe wicks,” Teploperedacha,96, No. 3, 74–82 (1974).
L. L. Vasil'ev, A. N. Abramenko, and L. E. Kanonchik, “Heat transfer with evaporation and boiling of a liquid in grooves in thin-film evaporators,” Raketn. Tekh. Kosmon.,17, No. 12, 110–118 (1979).
M. A. Mikheev and I. M. Mikheeva, Fundamentals of Heat Transfer, Beekman Publ. (1968).
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 42, No. 2, pp. 218–227, February, 1982.
Rights and permissions
About this article
Cite this article
Abramenko, A.N., Kanonchik, L.E., Shashkov, A.G. et al. Heat transfee with evaporation and boiling of a liquid in porous bodies. Journal of Engineering Physics 42, 144–150 (1982). https://doi.org/10.1007/BF00827259
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00827259