Literature cited
K. Shtepanek, Stanki Instrum., No. 9 (1960).
B. N. Ivanov et al., New Instruments for Measuring Kinematic Precision of Gear-Cutting Machines [in Russian], Scientific-Research Institute of Information on Construction, Road and Municipal Machinery Manufacture, Moscow (1967), No. 18-67-15.
V. F. Ionak and B. N. Ivanov, in: Machining Metals by Cutting [in Russian], Scientific-Research Institute of Information on Construction, Road and Municipal Machinery Manufacture, Moscow (1966), No. 17-66-8.
V. F. Ionak and B. N. Ivanov, Trudy NIIPMASh, No. 6, Kramotorsk (1969).
B. N. Ivanov, Izmer. Tekh., No. 3 (1974).
A. L. Dubenets, in: Materials of the First Scientific and Technical Conference, Scientific-Research, Planning, and Technological Institute of Machinery Manufacture, Kramatorsk (1968).
M. S. Agurskii, I. A. Vul'fson, and V. A. Ratmirov, Numerical Programmed Control of Machines [in Russian], Mashinostroenie, Moscow (1966).
B. N. Ivanov and I. F. Buzunova, Inventors' Certificate No. 339930, Byull. Izobr., No. 17 (1972).
Yu. Ya. Ésterzon et al., Inventors' Certificate No. 315908, Byull. Izobr., No. 29 (1971).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 3, pp. 39–40, March, 1977.
Rights and permissions
About this article
Cite this article
Ivanov, B.N., Ivanov, Y.S. Effect of nonlinear distortions in frequency doublers on angle-measurement errors. Meas Tech 20, 366–368 (1977). https://doi.org/10.1007/BF00825312
Issue Date:
DOI: https://doi.org/10.1007/BF00825312