Literature cited
GOST 16267-70 on “State system of industrial instrument” (GSI). Metrology, Terms and definitions” (1970).
N. I. Tyurin, Introduction to Metrology [in Russian], Standartov, Moscow (1973).
G. D. Burdun and B. N. Markov, Foundations of Metrology [in Russian], Standartov, Moscow (1972).
GOST 8.011-72, on “GSI. Measurement precision indexes and manner of presenting measurement results” (1972).
K. I. Abadzhi, Izmeritel'. Tekh., No. 8 (1972).
GOST 8.051-73, On “GSI. Errors tolerated in measuring the linear dimensions from one to 500 mm” (1973).
Handbook on Production Control in Engineering [in Russian], 3rd ed., Mashinostroenie, Leningrad (1974).
GOST 8.009-72, On “GSI. Normalized measuring-equipment metrological characteristics” (1972).
GOST 8.088-73, On “GSI. Gear and lever indicators with a scale factor of 0.01 mm. Methods and means of testing” (1973).
GOST 18833-73, On “Gear and lever measuring heads. Types, basic parameters and dimensions. Technical requirements” (1973).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 5, pp. 91–92, May, 1976.
Rights and permissions
About this article
Cite this article
Abadzhi, A.I. Terminology once more. Meas Tech 19, 779–781 (1976). https://doi.org/10.1007/BF00823685
Issue Date:
DOI: https://doi.org/10.1007/BF00823685