Literature cited
A. E. Kobriiskii et al., Izv. Akad. Nauk SSSR, Énerg. Avtom., No. 6 (1961).
A. E. Kobriiskii et al., Stanki Instrum., No. 1 (1971).
O. B. Balakshin (editor), Self-adjusting Machine Tools, Control of Elastic Displacements on Machine Tools [in Russian], Mashinostroenie, Moscow (1967).
M. S. Nevel'son, Automatic Control of Machining Accuracy [in Russian], Mashinostroenie, Leningrad (1973).
M. I. Breido et al., A Self-adjusting System of Programmed Control for Machine Tools, Automation of the Processes of Machine Design [in Russian], AN SSSR, Moscow (1962).
A. E. Kobriiskii et al., in: Automating the Drive and Control of Machines [in Russian], Nauka, Moscow (1967).
L. S. Dodin et al., Stanki Instrum., No. 3 (1973).
A. Sh. Koliskor et al., in: Automating the Solution of Problems of Machine Dynamics [in Russian], Nauka, Moscow (1973).
A. Sh. Koliskor, Inventor's Certificate No. 378052, Byul. Izobret., No. 38 (1973).
A. Sh. Koliskor and B. L. Salamandra, in: Adaptive Systems of Control for Machine Tools [in Russian], NIImash, Moscow (1971).
A. E. Kobriiskii et al., Inventor's Certificate No. 222848, Byul. Izobret., No. 23 (1968).
A. Sh. Koliskor et al., Inventor's Certificate No. 329962, Byul. Izobret., No. 8 (1972).
V. K. Astashev et al., Inventor's Certificate No. 212714, Byul. Izobret., No. 9 (1968).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 10, pp. 31–32, October, 1978.
Rights and permissions
About this article
Cite this article
Koliskor, A.S. Structural computer synthesis of systems for operator control of the quality with which machine tools equipped with automatic cycles operate. Meas Tech 21, 1364–1366 (1978). https://doi.org/10.1007/BF00823066
Issue Date:
DOI: https://doi.org/10.1007/BF00823066