Literature cited
N. A. Borodachev, Quality and Accuracy Analysis in Production [in Russian], Mashgiz, Moscow (1946).
All-Union State Standard (GOST) 8.009-72, “Standardized metrological characteristics of measuring instruments”,
GOST 16.604-74, “Control of technological processes. Inspection of the accuracy of technological processes. General requirements.”
N. N. Markov et al., Errors and Selection of Instruments in Linear Measurements [in Russian], Mashinostroenie, Moscow (1967).
V. P. Korotkov and B. A. Taits, Principle of Metrology and Precision of Mechanical Devices [in Russian], Mashgiz, Moscow (1961).
V. P. Korotkov (editor), Interchangeability and Technical Measurements in Machine Design [in Russian], Mashinostroenie, Moscow (1972).
V. D. Frumkin et al., Reliability of Testing of Radio-Engineering Measuring Instruments and Test Tolerances [in Russian], Standartov, Moscow (1975).
N. N. Markov and P. A. Satserdotov, Stand. Kach., No. 8 (1975).
N. N. Vostroknutov et al., Izmer. Tekh., No. 8 (1975).
GOST 8.051-73, “State System for Ensuring Uniform Measurements (GSI). Allowable errors in linear measurements from 1 to 500 mm.”
N. V. Smirnov and L. N. Bolsheev, Tables of Two-Dimensional Normal Distribution [in Russian], AN SSSR, Moscow (1962).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 5, pp. 12–13, May, 1978.
Rights and permissions
About this article
Cite this article
Kopytov, I.P. Test reliability. Meas Tech 21, 609–611 (1978). https://doi.org/10.1007/BF00821030
Issue Date:
DOI: https://doi.org/10.1007/BF00821030