Conclusions
-
1.
The optimum regime for heat treating AL19 alloy castings is one-stage heating prior to quenching at 545±5° for 10 to 12 hours (regime T4) and artificial aging at 175 ±5° for 3 to 6 hours (regime T5).
-
2.
Compared with two-stage systems, this regime considerably simplifies the procedure, improves the efficiency of the heat treatment equipment and halves the consumption of electric power.
-
3.
Quenching in boiling water considerably reduces the warping of the castings and eliminates the need to straighten them after heat treatment.
Similar content being viewed by others
Rights and permissions
About this article
Cite this article
Loktionova, N.A., Rastvorova, N.M. & Breslavtseva, O.P. New heat treatment regime for alloy AL19 castings. Met Sci Heat Treat 4, 439–441 (1962). https://doi.org/10.1007/BF00820037
Issue Date:
DOI: https://doi.org/10.1007/BF00820037