Literature cited
All-Union State Standard (GOST) 8.138-75: State System of Units. State Special Standard and All-Union Test Scheme for Means of Measurement of Displacement, Velocity, and Acceleration in Vibrational Motion of Solids in the Frequency Range 0.5–104 Hz.
All-Union State Standard (GOST) 8.179-76. State System of Units. The State Primary Standard and All-Union Test Scheme for Means of Measuring Constant Linear Accelerations of Solids in the Range 0.001–200 m/sec2.
Yu. I. Iorish, Vibrometry [in Russian], Mashgiz, Moscow (1963).
A. E. Sinel'nikov, Izmer. Tekh., No. 5 (1968).
A. E. Sinel'nikov and B. é. Vlanter, Calibration and Testing of Low-Frequency Accelerometers [in Russian], LDNTP, Leningrad (1971).
R. O. Smith, E. A. Willis, and J. S. Hilten, J. Res. Nat. Bur. Stand., No. 4 (1962).
A. B. Kurzner, Tr. Metrol. Inst. SSSR, No. 156 (216) (1974).
A. B. Kurzner, Metrologiya, No. 4 (1975).
A. B. Kurzner, Tr. Metrol. Inst. SSSR, No. 192 (252) (1976).
I. A. Gorenshtein and I. A. Shul'man, Inertial Navigation Systems [in Russian], Mashinostroenie, Moscow (1970).
E. A. Nikitin and A. A. Balashova, The Design of Differentiating and Integrating Gyroscopes and Accelerometers [in Russian], Mashinostroenie, Moscow (1969).
B. é. Blanter et al., Metrologiya, No. 1 (1975).
P. N. Agaletskii, Inventor's Certificate No. 72949, Byul. Izobret., No. 11 (1948).
S. S. Shchedrovitskii, Izmer. Tekh., No. 6 (1958).
F. A. Markhevka, Izmer. Tekh., No. 7 (1959).
N. N. Klishevich and A. B. Kurzner, Tr. Metrol. Inst. SSSR, No. 139 (199) (1972).
Standard USA, Methods for Calibration of Shock and Vibration Pickups.
“Accelerometer calibration,” Instrum. Control Syst.,34, No. 2 (1961).
S. R. Sporn, Trans. ASME, May (1961), pp. 202–206.
S. Grady and Nicholson, in: Inst. Environment Soc., Annual Technical Meeting Proceedings, Prospect 3, Philadelphia (1964).
J. L. Thomas and R. M. Evans, Reports and Memoranda, No. 3601, August (1967).
R. L. Ackoff, Identification and System Parameter Estimation [Russian translation], Mir, Moscow (1975).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 3, pp. 51–52, March, 1978.
Rights and permissions
About this article
Cite this article
Kurzner, A.B. Methods of eliminating systematic errors in calibrating a linear accelerometer with a centrifuge. Meas Tech 21, 383–385 (1978). https://doi.org/10.1007/BF00817342
Issue Date:
DOI: https://doi.org/10.1007/BF00817342