Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 18, Issue 12, pp 893–896 | Cite as

Production of constructional engineering components from porous preforms by hot forging

  • I. D. Radomysel'skii
  • G. G. Serdyuk
  • E. L. Pechentkovskii
  • S. G. Napara-Volgina
Powder Metallurgical Materials, Parts, and Coatings

Keywords

Engineering Component Porous Preform 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    Kh. V. Antes, “Production technology and properties of P/M forgings,” in: Powder Metallurgy of Materials for Special Applications [in Russian], Metallurgiya, Moscow (1977), pp. 225–238.Google Scholar
  2. 2.
    Yu. G. Dorofeev, Dynamic Hot Pressing of P/M Preforms [in Russian], Metallurgiya, Moscow (1977).Google Scholar
  3. 3.
    M. T. Brown and P. K. Jones, “Experimental and practical aspects of the powder forging process,” Int. J. Powder Metall.,6, No. 4, 29–42 (1970).Google Scholar
  4. 4.
    A. N. Bryukhanov and A. V. Rebel'skii, Hot Forging, Die Design and Calculations [in Russian], Mashgiz, Moscow (1952).Google Scholar
  5. 5.
    I. D. Radomysel'skii, “Constructional P/M parts and their uses in industry,” in: Powder Metallurgy in Machine Construction [in Russian], Naukova Dumka, Kiev (1961), pp. 11–17.Google Scholar
  6. 6.
    I. D. Radomysel'skii et al., “Production of alloy powders by diffusional impregnation from pointsources,” in: Sintered Constructional Materials [in Russian], Naukova Dumka, Kiev (1972), pp. 3–10.Google Scholar
  7. 7.
    A. K. Grabchak et al., “Hot forging of P/M parts of complex shape,” in: Summaries of Papers to the Third All-Union Seminar on Constructional Sintered Materials and Parts [in Russian], Naukova Dumka, Kiev (1975), pp. 19–23.Google Scholar
  8. 8.
    A. K. Grabchak et al., “Hot volume forging of parts from iron powder,” in: Sintered Constructional Materials [in Russian], Naukova Dumka, Kiev (1976), pp. 29–32.Google Scholar
  9. 9.
    F. A. Ivanenko, “Effect of gas content on the properties of P/M carbon steels produced by dynamic hot pressing,” in: Dynamic Hot Pressing [in Russian], Vol. 316, No. 2, Novocherkassk (1976), pp. 61–65.Google Scholar
  10. 10.
    M. Petrdlik, Contaminations and Impurities in Sintered Materials [Russian translation], Metallurgiya, Moscow (1971).Google Scholar
  11. 11.
    Yu. G. Dorofeev, Dynamic Hot Pressing in Powder Metallurgy [in Russian], Metallurgiya, Moscow (1971).Google Scholar
  12. 12.
    H. A. Kuhn and G. L. Downey, “P/M preform designed for hot forging,” Fall Powder Metallurgy Conference Proceedings (Detroit, Michigan), New York (1971).Google Scholar

Copyright information

© Plenum Publishing Corporation 1980

Authors and Affiliations

  • I. D. Radomysel'skii
    • 1
  • G. G. Serdyuk
    • 1
  • E. L. Pechentkovskii
    • 1
  • S. G. Napara-Volgina
    • 1
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkraine

Personalised recommendations