Summary
The aim of this work is to investigate the thermal stress intensity factor of a functionally gradient half space with an edge crack under a steady heat flux. All material properties of the functionally gradient half space, except for the coefficient of linear thermal expansion, are exponentially dependent on the distance from the boundary of the plate. The coefficient of linear thermal expansion is assumed to be two-dimensionally dependent. The problem is reduced to a singular integral equation by using the Fourier transform. The thermal stress intensity factor versus the nonhomogeneous material parameters is calculated and represented in figures. The numerical results show that thermal stress intensity factor is dramatically decreased when the material nonhomogeneous parameters are appropriately selected.
Similar content being viewed by others
References
Noda, N.; Tsuji, T.: Steady thermal stresses in a plate of functionally gradient material. In: FGM Forum Proc. First Int. Sym. on Functionally Gradient Materials, Sendai, Japan, 1990, pp. 339–334
Arai, Y.; Kobayashi, K.; Tamura, M.: Elastic-plastic thermal stresses analysis for optimum design of FGM. In: FGM Forum Proc. Fourth National Sym. on Functionally Gradient Materials (FGM'91), Kawasaki, Japan, 1991, pp. 19–30
Delale, F.; Erdogan, F.: The crack problem for a nonhomogenous plane. Trans. ASME/J. Appl. Mech. 50 (1983) 609–614
Delale, F.; Erdogan, F.: On the mechanical modeling of interfacial region in bonded half-planes. Trans. ASME/J. Appl. Mech. 55 (1988) 317–324
Erdogan, F.; Wu, B.: Analysis of FGM specimens for fracture toughness testing. Trans. American Ceramic Society Functionally Gradient Materials 34 (1993) 39–46
Gupta, G. D.; Erdogan, F.: The problem of edge cracks in an infinite strip. Trans. ASME. Ser. E: J. Appl. Mech. 41 (1974) 1001–1006
Noda, N.; Jin, Z.: Thermal stress intensity factors for a crack in a functionally gradient material. Int. J. Solids Struct. 30 (1993) 1039–1056
Jin, Z.; Noda, N.: Minimization of thermal stress intensity factor for a crack in a metal-ceramic mixture. Trans. American Ceramic Society, Functionally Gradient Materials, 34 (1993) 47–54
Noda, N.; Jin, Z.: A crack in a functionally gradient material under thermal shock. Arch. Appl. Mech. 64 (1994) 99–110
Jin, Z.; Noda, N.: Edge crack in a nonhomogeneous half plane under thermal loading. J. Thermal Stresses 17 (1994) 591–599
Jin, Z.; Noda, N.: Crack-tip singular fields in nonhomogeneous materials. Trans. ASME/J. Appl. Mech. 61 (1994) 738–740
Kreyszig, E.: Advanced engineering mathematics. New York: John Wiley & Sons 1983
Kaya, A. C.; Erdogan, F.: On the solution of integral equations with strongly singular kernels. Quart. Appl. Math. 45 (1987) 105–122
Erdogan, F.; Kaya, A. C.; Joseph, P. F.: The crack problem in bonded nonhomogeneous material. Trans. ASME/J. Appl. Mech. 58 (1991) 410–418
Erdogan, F.; Ozturk, M.: Diffusion problems in bonded nonhomogeneous materials with an interface cut. Int. J. Eng. Sci. 30 (1992) 1507–1523
Gradshteyn, I. S.; Ryzhik, I. M.: Tables of integrations, series and products. New York: Academic press (1980)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Nemat-Alla, M., Noda, N. Thermal stress intensity factor for functionally gradient half space with an edge crack under thermal load. Arch. Appl. Mech. 66, 569–580 (1996). https://doi.org/10.1007/BF00808145
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00808145