Magnetic properties of sintered iron-silicon alloys
- 48 Downloads
A study was made of the magnetic properties of specimens from an iron-silicon powder prepared by the method of impregnation from point sources.
Using this process, it is possible to produce, at relatively low temperatures (800–1000°C) and short treatment durations (3–4 h), homogeneous alloy powders in which the silicon is present in the form of anα solid solution.
It is shown that the magnetic properties of the material investigated depend to a large extent upon its porosity and the sintering conditions employed. Maximum magnetic properties are exhibited by specimens with a coarse-grained structure and pure grain boundaries.
Prealloyed iron-silicon powder may be recommended for the production of sintered soft magnetic parts operating in constant and commercial-frequency (50 Hz) alternating fields.
KeywordsSilicon Porosity Solid Solution Magnetic Property Point Source
Unable to display preview. Download preview PDF.
- 1.G. I. Aksenov, Tr. KuAI,23, (1962).Google Scholar
- 2.Yu. P. Orekhov, Transactions of an Intercollegiate All-Union Scientific-Technical Conference [in Russian], KuAI (1961).Google Scholar
- 3.I. N. Frantsevich, O. A. Panasyuk, and A. I. Gunchenko, Sintered Electrical Components [in Russian], TsINTI Élektroprom, Moscow (1962).Google Scholar
- 4.A. B. Al'tman et al., Transactions of the Third Scientific-Technical Conference on the Development and Application of Electrical Components [in Russian], VNIIÉM, Moscow (1964).Google Scholar
- 5.V. E. Terletskii et al., Tr. VNIITélektromashino- i Apparatostr.,7, 62 (1969).Google Scholar
- 6.I. D. Radomysel'skii, S. G. Napara-Volgina, and A. I. Boiko, Author's Certificate (patent) No. 195634, Jan. 13, 1965; Byul. Izobret., No. 5 (1970).Google Scholar