Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 27, Issue 10, pp 810–813 | Cite as

Fracture toughness of materials with coatings

  • L. I. Tushinskii
  • A. V. Plokhov
  • A. P. Artem'ev
  • Yu. P. Poteryaev
Powder Materials, Components, and Coatings
  • 13 Downloads

Keywords

Fracture Toughness 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    L. I. Tushinskii and L. B. Tikhomirova, “Structural aspects of increasing the structural strengths of alloys,” Fiz. Khim. Mekh. Mater., No. 6, 10–14 (1975).Google Scholar
  2. 2.
    B. E. Jacobson, “Methods for characterization of coating microstructures,” Thin Solid Films,73, No. 2, 331–345 (1980).Google Scholar
  3. 3.
    A. V. Plokhov, A. P. Artem'ev, and A. A. Bataev, “Fracture toughness of 20 steel after controlled thermoplastic hardening,” in: New Methods of Hardening and Treatment of Metals [in Russian], Novosibirsk Electrotechnical Institute, Novosibirsk (1981), pp. 21–33.Google Scholar
  4. 4.
    A. P. Artem'ev and Yu. P. Poteryaev, “Examination of the processes of failure of U8 steel after thermoplastic hardening,” in: Structures of the Volume and Surface Hardened Steel [in Russian], Novosibirsk Electrotechnical Institute, Novosibirsk (1984), pp. 35–40.Google Scholar
  5. 5.
    M. A. Krishtal, “Physical fundamentals: strength and failure of diffusion layers and coatings,” Zashch. Pokr. Met., No. 13, 3–6 (1979).Google Scholar
  6. 6.
    M. A. Krishtal, “Examination of defects formed in formation of coatings, surface hardening, and service of machine components with long service life,” Probl. Prochn., No. 3, 84–90 (1981).Google Scholar
  7. 7.
    L. Hatch and B. Rat, “Methods of surface treatment of high-strength alloys to increase their cracking resistance: state and prospects,” in: Surface Treatment and Reliability of Materials [Russian translation], Mir, Moscow (1985), pp. 121–148.Google Scholar
  8. 8.
    B. A. Lyashenko, R. V. Tsygulev, and P. B. Kuznetsov, “Is it always necessary to increase the adhesion strengths of protective coatings,” Probl. Prochn., No. 5, 70–74 (1987).Google Scholar
  9. 9.
    G. G. Maksimovich, V. F. Shatinskii, and V. I. Kopylov, Physical-Chemical Processes in Plasma Spraying and Failure of Materials with Coatings [in Russian], Naukova Dumka, Kiev (1983).Google Scholar
  10. 10.
    GOST 25.506-85. Strength Calculations and Tests. Methods of Mechanical Testing of Metals. Determination of Cracking Resistance Characteristics (Fracture Toughness) in Static Loading, Issued 01.01.86.Google Scholar
  11. 11.
    RD 50-345-82. Procedure Instructions. Strength Calculations and Tests. Methods of Mechanical Testing of Metals. Determination of Fracture Toughness (Cracking Resistance) Characteristics in Cyclic Loading [in Russian], Standartov, Moscow (1983).Google Scholar
  12. 12.
    N. A. Makhutov, A. I. Tananov, A. P. Chernyaev, et al., “Methods of determining the fracture toughness characteristics of clad metals,” Zavod. Lab., No. 1, 66–72 (1982).Google Scholar

Copyright information

© Plenum Publishing Corporation 1989

Authors and Affiliations

  • L. I. Tushinskii
    • 1
  • A. V. Plokhov
    • 1
  • A. P. Artem'ev
    • 1
  • Yu. P. Poteryaev
    • 1
  1. 1.Novosibirsk Electrotechnical InstituteUSSR

Personalised recommendations