Literature cited
B. A. Vydrik, T. V. Solov'eva, and F. Ya. Kharitonov, Transparent Ceramics [in Russian], Energiya, Moscow (1980).
M. D. Nikitin, A. Ya. Kulik, and N. I. Zakharov, Heat Protecting and Wear-Resistant Coatings of Components of Diesels [in Russian], Mashinostroenie, Leningrad (1977).
A. S. Nagin, O. B. Chevela, A. G. Cherdakin, and L. M. Ryabich, “Microanalysis of a Nichrome plasma coating,” Poroshk. Metall., No. 4, 97–101 (1975).
O. B. Chevela and L. M. Orlova, “Structural special features of formation of two-layer plasma coatings,” Poroshk. Metall., No. 10, 48–54 (1974).
O. B. Chevela, Yu. K. Pantsyrev, A. V. Tutov, et al., “Industrial deposition of heat protective coatings,” Svar. Proizvod., No. 7, 38–39 (1971).
O. B. Chevela, L. M. Ryabich, K. G. Akinin, and Yu. K. Pantsyrev, “Some properties of plasma coatings of chrome-nickel spinel,” Poroshk. Metall., No. 10, 40–43 (1976).
L. N. Usov and A. I. Borisenko, Using Plasma for Producing High-Temperature Coatings [in Russian], Nauka, Moscow and Leningrad (1965).
B. M. Solov'ev, G. F. Degtev, L. N. Gasik, et al., “Comparative investigations of the properties of heat resisting coatings produced by electric arc metallizing and plasma spraying,” in: Proceedings of 9th All-Union Conference on Heat Resisting Coatings: High-Temperature Protection of Materials [in Russian], Nauka, Leningrad (1981), pp. 164–166.
L. M. Demidenko, Highly Refractory Composite Coatings [in Russian], Metallurgiya, Moscow (1979).
O. B. Chevela, I. A. Morozov, V. E. Loginov, and Yu. K. Pantsyrev, “Experimental examination of the temperature of the plasma jet,” Svar. Proizvod., No. 10, 1–3 (1975).
L. I. Gotlib, “Plasma spraying of coatings,” in: Protective High-Temperature Coatings [in Russian], Nauka, Leningrad (1972), pp. 75-82.
B. M. Zakharov and M. G. Trofimov, “Effect of the extent of melting of zirconia on its adhesion in plasma deposition of coatings,” Poroshk. Metall., No. 3, 51–56 (1970).
B. G. Arabei, G. P. Lazarenko, V. S. Loskutov, et al., “Examination of the relationships governing plasma spraying of molybdenum on disks of VT9 titanium alloy,” in: Proceedings of 6th All-Union Conference on Heat Resisting Coatings: Inorganic and Organosilicate Coatings [in Russian], Nauka, Leningrad (1975), pp. 109–116.
Additional information
Translated from Poroshkovaya Metallurgiya, No. 10(310), pp. 42–45, October, 1988.
Rights and permissions
About this article
Cite this article
Chevela, O.V., Pantsyrev, Y.K. Spraying ZrO2 coating from small distances. Powder Metall Met Ceram 27, 794–796 (1988). https://doi.org/10.1007/BF00802776
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00802776