Advertisement

Soviet Powder Metallurgy and Metal Ceramics

, Volume 27, Issue 3, pp 204–207 | Cite as

Technological special features of manufacture of components of complicated configuration from metallic powders by hot stamping

  • G. E. Skorokhod
  • N. I. Burnaev
  • N. É. Kortsenshtein
  • A. M. Burov
  • G. G. Serdyuk
  • A. V. Stepichev
Theory and Technology of the Component Formation Process
  • 43 Downloads

Keywords

Metallic Powder Complicated Configuration Technological Special Feature 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    I. D. Radomysel'skii, “Powder structural components. Current state, and development prospects,” Poroshk. Metall., No. 10, 37–41 (1985).Google Scholar
  2. 2.
    G. G. Serdyuk, “Methods of shaping structural powder components,” Kuznech. Shtamp. Proizvod., No. 8, 7–9 (1982).Google Scholar
  3. 3.
    G. G. Serdyuk and M. B. Shtern, “Hot stamping porous blanks. Theory and technology,” in: Forming and Sintering Theory and Technology [in Russian], Institute of Problems of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1985), pp. 9–15.Google Scholar
  4. 4.
    G. A. Baglyuk, G. E. Mazharova, and L. A. Poznyak, Investigations in Hot Stamping of Porous Powder Blanks [in Russian], Preprint of the Institue of Problems of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1986).Google Scholar
  5. 5.
    Kh. A. Kun, “Main principles of stamping powder blanks,” in: Powder Metallurgy of Materials for Special Application [in Russian], Metallurgiya, Moscow (1977), pp. 143–158.Google Scholar
  6. 6.
    Yu. G. Dorofeev, Dynamic Hot Compacting Porous Powder Blanks [in Russian], Metallurgiya, Moscow (1977).Google Scholar
  7. 7.
    R. Davis, “Application of high speeds for compacting metallic powders and forging powder blanks,” in: Powder Metallurgy, No. 1, Vysheishaya Shkola, Minsk (1977), pp. 26–29.Google Scholar
  8. 8.
    I. D. Radomysel'skii, G. G. Serdyuk, E. L. Pechentkovskii, et al., “Production of structural components for engineering by hot stamping porous blanks,” Poroshk. Metall., No. 12, 46–51 (1979).Google Scholar
  9. 9.
    A. P. Lyashenko, V. A. Pavlov, V. A. Boguslaev, et al., “Production of powder materials from titanium by hot stamping,” Poroshk. Metall., No. 11, 33–44 (1984).Google Scholar
  10. 10.
    M. V. Storozhev and E. A. Popov, Theory of Pressure Working of Metals [in Russian], Mashinostroenie, Moscow (1971).Google Scholar
  11. 11.
    V. A. Pavlov and A. P. Lyashenko, “Investigations into the effect of flow of the powder material in hot stamping on the density and structure of hot-stamped powder titanium,” in: Powder Structural, Antifriction, and Frictional Materials [in Russian], Institute of Problems of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1983), pp. 77–82.Google Scholar
  12. 12.
    Kh. V. Antes, “Technology of production and properties of powder forgings,” in: Powder Metallurgy of Materials for Special Applications [in Russian], Metallurgiya, Moscow (1977), pp. 159–196.Google Scholar

Copyright information

© Plenum Publishing Corporation 1988

Authors and Affiliations

  • G. E. Skorokhod
    • 1
  • N. I. Burnaev
    • 1
  • N. É. Kortsenshtein
    • 1
  • A. M. Burov
    • 1
  • G. G. Serdyuk
    • 1
  • A. V. Stepichev
    • 1
  1. 1.Scientific and Production Organization of the Volgograd Scientific-Research Institute of Engineering TechnologyUSSR

Personalised recommendations