Metal Science and Heat Treatment

, Volume 25, Issue 6, pp 444–446 | Cite as

Hardening of the bearing necks of cold-rolling work rolls

  • B. D. Petrov
  • G. A. Shestakova
  • E. G. Moiseeva
50th Anniversary of the Ural Heavy Machinery Factory


Work Roll 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    G. F. Golovin and N. V. Zimin, The Technology of the Heat Treatment of Metals with the Use of Induction Heating [in Russian], Vol. 1, Mashinostroenie, Moscow (1979).Google Scholar
  2. 2.
    V. P. Suchkousov, "High-frequency induction hardening of railroad rails", Proceedings of the All-Union Scientific-Research Institute for High Frequency Currents [in Russian], No. 13 (1973), p. 134.Google Scholar
  3. 3.
    E. A. Shur et al., "The development of a method of high-frequency heat treatment of rails with differentiated hardness over the cross section", in: The Production of Rail-road Rails and Wheels [in Russian], No. 5, Ukr. Nauch.-Issled. Inst. Met., Kharkov (1977), p. 152.Google Scholar
  4. 4.
    G. A. Khasin et al., "The heat treatment of sized steel in a two-strand induction furnace", Stal', No. 3, 257 (1978).Google Scholar
  5. 5.
    A. D. Demichev et al., High Frequency Hardening [in Russian], Mashinostroenie, Moscow (1965), p. 54.Google Scholar
  6. 6.
    O. N. Mikhailov, "The groove method", in: Residual Stresses in the Semifinished Parts and Parts of Large Machines. Proceedings of the Scientific-Research Institute for Heavy Machinery Building [in Russian] (1971), p. 35.Google Scholar

Copyright information

© Plenum Publishing Corporation 1983

Authors and Affiliations

  • B. D. Petrov
  • G. A. Shestakova
  • E. G. Moiseeva

There are no affiliations available

Personalised recommendations