Soviet Powder Metallurgy and Metal Ceramics

, Volume 27, Issue 1, pp 65–68 | Cite as

Special features of the ductile-brittle transition in iron-based powder materials. I. Mechanical characteristics of powder iron in the ductile-brittle transition temperature range

  • S. A. Firstov
  • Yu. N. Podrezov
  • A. G. Zherdin
  • L. G. Shtyka
  • É. Ch. Pioro
  • M. E. Golovkova
  • N. Ch. Pioro
Test Methods and Properties of Powdered Materials

Keywords

Iron Transition Temperature Mechanical Characteristic Powder Material Powder Iron 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. F. Ioffe, “Mechanical and electrical properties of crystals,” in: Selected Works [in Russian], Vol. 1, Nauka, Leningrad (1974).Google Scholar
  2. 2.
    N. N. Davidenkov, “On brittle failure,” in: Problems of Engineering [in Russian], Metallurgizdat, Moscow (1950), pp. 467–474.Google Scholar
  3. 3.
    V. S. Ivanova, Failure of Metals [in Russian], Metallurgiya, Moscow (1979).Google Scholar
  4. 4.
    V. I. Trefilov and Yu. V. Mil'man, “The mechanism of plastic deformation of crystals with covalent bonds,” in: Problems of Physics of Metals and Metal Science [in Russian], No. 17, Izd. Akad. Nauk Ukr. SSR, Kiev (1963), pp. 32–34.Google Scholar
  5. 5.
    V. I. Trefilov, Yu. V. Mil'man, and S. A. Firstov, Physical Fundamentals of the Strength of Refractory Metals [in Russian], Naukova Dumka, Kiev (1975).Google Scholar
  6. 6.
    V. I. Trefilov, “Plastic deformation and failure of metals,” in: Physical Fundamentals of the Strength and Ductility of Metals [in Russian], Metallurgizdat, Moscow (1963), pp. 190–255.Google Scholar
  7. 7.
    O. A. Belous, V. N. Minakov, and V. I. Trefilov, “Effect of carbon on the low-temperature ductility of arc-remelted molybdenum alloys,” Izv. Akad. Nauk SSSR, Met., No. 8, 129–134 (1976).Google Scholar
  8. 8.
    É. Ch. Pioro, N. Ch. Pioro, and A. G. Zherdin, “Examination of the properties of a sprayed powder with branched particles,” Poroshk. Metall., No. 10, 1–7 (1984).Google Scholar
  9. 9.
    A. S. Drachinskii, A. E. Kushchevskii, and Yu. N. Podrezov, “Effect of porosity on the cracking resistance of iron powder,” Poroshk. Metall., No. 12, 80–84 (1982).Google Scholar
  10. 10.
    A. S. Drachinskii, A. E. Kushchevskii, and Yu. N. Podrezov, “Effect of the scale factor on the results of determination of the mechanical properties of powder materials based on iron,” Poroshk. Metall., No. 3, 88–93 (1983).Google Scholar
  11. 11.
    Yu. V. Mil'man, R. K. Ivashchenko, N. P. Moskalenko, et al., “Cold shortness of iron powder” in: Proceedings of 15th Scientific and Technical Conference Powder Metallurgy, Kiev, May 11–14, 1985, The Institute of Problems of Materials Science, Academy of Sciences of the Ukrainian SSR (1985), pp. 295–296.Google Scholar
  12. 12.
    J. S. Knott, Fundamentals of Fracture Mechanics [Russian translation], Metallurgiya, Moscow (1978).Google Scholar

Copyright information

© Plenum Publishing Corporation 1988

Authors and Affiliations

  • S. A. Firstov
    • 1
  • Yu. N. Podrezov
    • 1
  • A. G. Zherdin
    • 1
  • L. G. Shtyka
    • 1
  • É. Ch. Pioro
    • 1
  • M. E. Golovkova
    • 1
  • N. Ch. Pioro
    • 1
  1. 1.Institute of Problems of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkraine

Personalised recommendations