This is a preview of subscription content, log in via an institution to check access.
Literature cited
V. K. Fedyukin and M. E. Smagorinskii, Heat Cycling of Metals and Machine Parts [in Russian], Mashinostroenie, Leningrad (1989).
V. K. Fedyukin, Heat Cycling of Steel and Cast Iron [in Russian], Leningrad State Univ. (1977).
M. L. Bernshtein, P. D. Odesskii, T. M. Gryunval'd, and T. I. Morozova, "Thermomechanical strengthening of Cr−Mn−Si−V steels with deformation in the intercritical temperature range," Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 9, 122–127 (1985).
V. I. Pogorzhel'skii, Controlled Rolling of Continuously Cast Metal [in Russian], Metallurgiya, Moscow (1986).
V. M. Khlestov, G. K. Dorozhko, M. S. Podgaiskii, et al., "Interrelation between the kinetics of transformations of austenite, the structure and properties of steels 17G2AF and 17G1S after hot rolling," Izv. Akad. Nauk SSSR, Met., No. 5, 108–116 (1980).
S. S. D'yachenko, Formation of Austenite in Iron-Carbon Alloys [in Russian], Metallurgiya, Moscow (1982).
S. V. Kudryashov and M. E. Smagorinskii, "The effect of thermoplastic treatment on the structure and properties of ferritic-pearlitic steel," Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 7, 91–96 (1988).
M. E. Smagorinskii, Yu. A. Met-s, and S. V. Kudryashov, "Investigation of the temperature of the slab in hot rolling," Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 5, 58–61 (1988).
Additional information
Leningrad Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 5–8, December, 1989.
Rights and permissions
About this article
Cite this article
Smagorinskii, M.E., Kudryashov, S.V. & Kulinichev, V.I. ]Structure and properties of low carbon steels after heat treatment and heat cycling with plastic deformation. Met Sci Heat Treat 31, 862–866 (1989). https://doi.org/10.1007/BF00798225
Issue Date:
DOI: https://doi.org/10.1007/BF00798225