Conclusions
Measurements were made of values of the coefficient of friction of a half-journal porous sintered bearing operating with various lubricants at various loads and speeds corresponding to the conditions of operation of a spinning machine. A regression equation for the coefficient of friction has been obtained, from which the influence exerted by each of a number of factors investigated has been determined. A lubricating substance composition is recommended which lowers to a minimum the coefficient of friction of the journal bearings used in the drawing device of a spinning machine.
Similar content being viewed by others
Literature cited
V. D. Zozulya, Lubricants for Sintered Self-Lubricating Bearings [in Russian], Naukova Dumka, Kiev (1976).
V. V. Nalimov and N. A. Chernova, Statistical Methods of Planning of Extremal Experiments [in Russian], Nauka, Moscow (1965).
E. L. Shvedkov, Elementary Mathematical Statistics in Experimental Materials Science Problems [in Russian], Naukova Dumka, Kiev (1975).
Yu. V. Portnyagin, O. B. Romanov, S. N. Orlov, and N. K. Pod'yacheva, “Use of sintered materials in the frictional units of the drawing device of textile machines,” Transactions of an All-Union Seminar on Ways of Increasing the Reliability and Useful Life of Machines for the Textile and Light Industries [in Russian], Tashkent (1977), pp. 50–52.
M. M. Butovskii, M. P. Vladimirtsev, Yu. V. Portnyagin, and V. N. Chen, “Effect of spontaneous vibrations of grooved cylinders on the operating reliability of machines,” Transactions of an All-Union Seminar on Ways of Increasing the Reliability and Useful Life of Machines for the Textile and Light Industries [in Russian], Tashkent (1977), pp. 47–48.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 1 (205), pp. 52–54, January, 1980.
Rights and permissions
About this article
Cite this article
Moshkov, A.D., Pod'yacheva, N.K., Portnyagin, Y.V. et al. Use of the mathematical planning method in the selection of lubricating substances for filling the pores of sintered components of frictional units. Powder Metall Met Ceram 19, 39–41 (1980). https://doi.org/10.1007/BF00798161
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00798161