Literature cited
W. Schatt and E. Friedrich, “Self-activation of sintering processes in one-component systems,”Powder Metall Int. 13, No. 1, 15–20 (1981).
W. Schatt, H. E. Exner, E. Friedrich, and G. Petzow, “Schwindungvorgänge beim Einkomponenten-Sintern,”Acta Metall. 30, 1367–1375 (1982).
W. Schatt and E. Friedrich, “Dislocation-activated sintering process,” in: Proceedings of the 1984 PM Group Meeting, Harrogate, 5.1.
W. Schatt, E. Friedrich, and D. Joenson, “Spannungsverteilung and Versetzungsvervielfachung in der Sintrkontaktregion,”Acta Metall. 31, 121–128 (1983).
B. Kieback and W. Hermel, “Mechanical stresses and dislocation density in the contact zone between sintering particles,” in: Proceedings of the 1984 PM Group Meeting, Harrogate, 6.1.
H. E. Exner,Grundlagen von Sintervogängen, Gebrüder Borntraeger, Berlin-Stuttgart (1978).
E. Dudrová, Ľ. Parilák, E. Rudnayová, and M. Šlesár, “Physicometallurgical principles of compaction, sintering, and their relation with the properties of porous materials,” in: Proceedings of the 6th Internation Conference on PM in CSSR, Vol. 2, Brno (1982), pp. 73–83.
M. Šlesár, E. Dudrová, L. Parilák, and E. Rudnayová, “Influence of pressing and sintering conditions on microstructure formation in metallic porous systems,”Sci. Sintering 19, No. 1, 17–30 (1987).
D. Durdrová, Ľ. Parilák, and E. Rudnayová, “Spekanie Práskového zeleza z pohladu vyvoja struktúry,” in: Proceedings of the 5th Symposium on Metallography, V. Tatry (1983), pp. 266–271.
Ľ. Parilák, E. Dudrová, and E. Rudnayová, “Prispevok k optimalizácii struktúrneho parametra pre hodnotenie vlastnosti spekanych materiálov,” in: Proceedings of a National Conference on Fractography, V. Tatry (1983), pp. 141–145.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 3(327), pp. 15–20, March, 1990.
Rights and permissions
About this article
Cite this article
Dudrová, E., Rudnayová, E., Parilák, Ľ. et al. Intensity and effectiveness of sintering of iron powder compacts. Powder Metall Met Ceram 29, 183–187 (1990). https://doi.org/10.1007/BF00797957
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00797957