Soviet Powder Metallurgy and Metal Ceramics

, Volume 31, Issue 12, pp 1075–1077 | Cite as

Experience of phenomenological description of sintering rate for powder articles with high-frequency currents

  • V. G. Plekhanov
Exchange of Experience and Information
  • 12 Downloads

Abstract

Data are provided for an experimental study of the dependence of sintering temperature on heating time and rate, grain size composition, and on the frequency of the current supplied, obtained when producing metal powder articles by induction sintering with a high-frequency current. It is shown that with the help of a computer it is possible to determine which of the equations suggested describes the sintering rate for particles by this method.

Keywords

Grain Size Experimental Study Metal Powder Heat Time Size Composition 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    V. I. Domogatskii, V. O. Khomutov, S. V. Efremov, and S. M. Koleshev, “Principal bases of high-quality induction heating for sintered blanks,” Proc. IV All-Union Sci.-Tech. Conf. “Hot Pressing in Powder Metallurgy” (Novocherkassk, 22–26 Oct. 1981), Novocherkassk (1981).Google Scholar
  2. 2.
    V. M. Kuznetsov, “Study of the sintering process by high-frequency currents and development of technology for preparing sintered blanks of piston rings for D 100 type engines,” Author's Abstr. Diss. Cand. Tech. Sci., Moscow (1978).Google Scholar
  3. 3.
    Yu. S. Gushchin, “Development of industrial manufacturing technology for powder rings and a study of sintering and deformation using HFC heating,” Author's Abstr. Diss. Cand. Tech. Sci., Leningrad (1981).Google Scholar
  4. 4.
    N. A. Arakelyan and A. S. Porakyan, “Study of induction heating processes for sintered carbon-containing materials,” Proc. XIV All-Union Conf. on Powder Metallurgy, Erevan (1979).Google Scholar
  5. 5.
    V. G. Plehanov, S. N. Davydov, V. I. Martyshkin, and V. V. Lapin, “Sintering of sealing rings made of metal powders by means of HFC,” Technology, Economics, and Organization of Production: Sci.-Tech. Collection, TsNIITÉItraktorsel'khozmash, No. 2(6), 24–30 (1982).Google Scholar
  6. 6.
    S. S. Ermakov and K. R. Krautman, “Features of porous powder blank heating by HFC,” in: Electrophysical Technology for Powder Metallurgy [in Russian], Institute of Materials Science Problems, Ukrainian Academy of Sciences, Kiev (1983).Google Scholar
  7. 7.
    V. G. Plekhanov and V. I. Martyshkin, “Features of high-frequency current heating for powder compacts,” Proc. III Republ. Sci.-Tech. Conf. “Electrophysical Technologies in Powder Metallurgy,” Riga (1986).Google Scholar
  8. 8.
    V. G. Plekhanov, “Preparation of sealing rings made of metal powders using high-frequency currents,” Traktory i Sel'khozmashiny, No. 4, 14–16 (1989).Google Scholar
  9. 9.
    L. Sh. Bulatov, “Kinetics of heating structural components made of ferromagnetic powders with induction sintering,” Poroshk. Metal., No. 7, 49–52 (1983).Google Scholar
  10. 10.
    A. I. Raichenko, V. M. Kaptsevich, K. E. Belyavin, and A. A. Gurevich, “Study of conditions for the stability of interparticle contacts with electric pulse sintering,” in: Electrophysical Technologies in Powder Metallurgy: Coll. of Scientific Works [in Russian], Institute of Materials Science Problems, Ukrainian Academy of Sciences, Kiev (1989).Google Scholar
  11. 11.
    V. G. Plekhanov, “Basic features and technology of sintering pressed blanks,” in: Electrophysical Technologies in Powder Metallurgy: Coll. of Scientific Works [in Russian], Institute of Materials Science Problems, Ukrainian Academy of Sciences, Kiev (1989).Google Scholar

Copyright information

© Plenum Publishing Corporation 1993

Authors and Affiliations

  • V. G. Plekhanov
    • 1
  1. 1.Planning and Design Institute of Technology “Avtokuzlitmash,” RubtsovskUSSR

Personalised recommendations