Soviet Powder Metallurgy and Metal Ceramics

, Volume 31, Issue 10, pp 883–885 | Cite as

Loss of carbon during plasma-spraying of clad carbide powders

  • A. G. Tsidulko
  • V. M. Rusanov
  • G. V. Bobrov
  • I. A. Dokukina
  • I. I. Timofeeva
  • T. I. Shaposhnikova
Exchange of Experience and Information
  • 19 Downloads

Abstract

Composition of particles upon atomization of unclad and clad powders is studied. It is estabished that the losses of carbon upon atomization of unclad particles are different for different carbides and increase in the sequence Cr3C2-TiC-WC. Upon atomization of clad powders, we observed the highest carbon losses for the particles of tungsten carbide, somewhat smaller losses for titanium carbide, and almost negligible losses for chromium carbide.

Keywords

Titanium Carbide Chromium Tungsten High Carbon 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. Ya. Kulik, Yu. S. Borisov, A. S. Mnukhin, and M. D. Nikitin, High-Temperature Plasma Spraying of Powder Composites with Gases [in Russian], Mashinostroenie, Leningrad (1985).Google Scholar
  2. 2.
    G. V. Bobrov, V. B. Shlyakhov, G. M. Blyukher, and T. E. Fomina, “Decreasing the carbon losses during plasma spraying of tungsten carbide,” in: Preparation of Coatings by High-Temperature Plasma Spraying [in Russian], Atomizdat, Moscow (1973).Google Scholar

Copyright information

© Plenum Publishing Corporation 1993

Authors and Affiliations

  • A. G. Tsidulko
    • 1
  • V. M. Rusanov
    • 1
  • G. V. Bobrov
    • 1
  • I. A. Dokukina
    • 1
  • I. I. Timofeeva
    • 1
  • T. I. Shaposhnikova
    • 1
  1. 1.Samarkand Aeronautical InstituteUSSR

Personalised recommendations