Literature cited
A. N. Pilyankevich, Practical Electron Microscopy [in Russian], Mashgiz, Moscow (1961).
V. I. Tret'yakov, in: Principles of the Metallurgy and Production Technology of Sintered Hard Metals [in Russian], Metallurgiya, Moscow (1976), p. 527.
I. N. Chaporova and K. S. Chernyavskii, in: Structure of Sintered Hard Metals [in Russian], Metallurgiya, Moscow (1975), p. 247.
A. N. Pilyankevich, T. A. Shapoval, V. K. Vitryanyuk, V. N. Paderno, and I. Ya. Aronin, “An electron microscopical investigation of fracture surfaces of hard alloys based on titanium carbide,” Poroshk. Metall., No. 8, 49–53 (1978).
P. O. Snell, “The effect of carbon content and sintering temperature on structure formation and properties of a TiC-24% Mo-15% Ni alloy,” Planseeber. Pulvermetall.,22, 91–106 (1974).
V. A. Zhilyaev, V. V. Fedorenko, and G. P. Shyeikin, “Mechanism of formation of coaxial structure in alloys based on titanium carbide and carbonitride,” Transactions of the Fifth International Conference on Powder Metallurgy in Czechoslovakia, Vol. 2, Gottwaldov (1978), pp. 189–200.
L. Lindau and K. Stjernberg, “The crystal growth in TiC-Ni-Mo and TiC-Ni-W cemented carbides,” Powder Metall.,19, No. 4, 210–213 (1976).
L. A. Gaevskaya, V. N. Paderno, A. N. Martynenko, A. A. Rogozinskaya, and G. K. L'vov, “An investigation of the abrasive properties of refractory-metal carbide micropowders,” Transactions of the Fifth International Conference on Powder Metallurgy in Czechoslovakia, Vol. 1, Gottwaldov (1978), pp. 155–165.
H. Suzuki, K. Hayashi, and O. Terada, “Relation between transverse-rupture strength and fracture source in TiC-Mo-Ni alloys,” J. Jpn. Soc. Powders Powder Metall.,22, ' No. 5, 167–172 (1975).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 10(202), pp. 73–79, October, 1979.
The authors are grateful to members of the staff of the Chemistry and Technology of Fine Technical Ceramics Department of the Lensovet Leningrad Technological Institute for carrying out the tests on specimens.
Rights and permissions
About this article
Cite this article
Pilyankevich, A.N., Shapoval, T.A., Dzodziev, G.T. et al. Interrelationship between the structure and properties of hard metals based on titanium carbide. Powder Metall Met Ceram 18, 739–744 (1979). https://doi.org/10.1007/BF00797448
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00797448