Literature cited
G. V. Samsonov, S. Yu. Sharivker, E. A. Astakhov, and A. P. Garda, “Some features of the detonation deposition of coatings,” in: Inorganic and Organosilicate Coatings [in Russian], Nauka, Leningrad (1975), pp. 80–86.
L. T. Gordeeva, K. N. Gedgovd, A. I. Krasovskii, et al., “Effect of processing parameters on some properties of detonation-deposited alumina coatings,” Poroshk. Metall., No. 1, 88–91 (1978).
U.S. Pat. No. 3801346 (1974).
E. A. Astakhov, A. I. Zverev, S. Yu. Sharivker, et al., “Characteristics of two methods of powder introduction in detonation spray-deposition,” Poroshk. Metall., No. 1, 104–107 (1978).
A. I. Grigorov, A. I. Tanatov, Yu. P. Fed'ko, and L. M. Shtein, “Some characteristic structural features and properties of detonation-deposited coatings,” Mashinovedenie, No. 3, 82–86 (1976).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 10(202), pp. 47–49, October, 1979.
Rights and permissions
About this article
Cite this article
Klimenko, V.S. Detonation spray-deposition of alumina at various degrees of filling of the barrel with carrier gas. Powder Metall Met Ceram 18, 716–718 (1979). https://doi.org/10.1007/BF00797443
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00797443