Literature cited
I. P. Sukharev and B. N. Ushakov, Investigation of Strains and Stresses by the Moiré Bands Method [in Russian], Mashinostroenie, Moscow (1969).
V. M. Segal, E. M. Makushok, and V. I. Reznikov, Investigation of the Plastic Shaping of Metals by the Moiré Method [in Russian], Metallurgiya, Moscow (1974).
O. V. Roman, E. I. Verbitskii, and O. V. Zayash, “Investigation of the strained state of porous blanks under conditions of high-speed cavity formation by the Moiré method,” in: Metallurgiya [in Russian], Vol. 14, Vyshéish. Shkola, Minsk (1980), pp. 134–136.
O. V. Roman, E. V. Zvonarev, D. D. Velyuga, and G. P. Ustinova, “Investigation of the stressed and strained state of sintered porous blanks during reverse extrusion by the Moiré method,” Poroshk. Metall., No. 10, 7–13 (1980).
G. M. Zhdanovich, Theory of Pressing of Metal Powders [in Russian], Metallurgiya, Moscow (1969).
M. Yu. Bal'shin, Scientific Principles of Powder Metallurgy [in Russian], Metallurgiya, Moscow (1972).
I. L. Perlin and L. Kh. Raitbarg, Theory of Pressing of Metals [in Russian], Metallurgiya, Moscow (1979).
V. S. Perel'man, The Shaping of P/M Materials [in Russian], Metallurgiya, Moscow (1979).
S. I. Gubkin, Theory of Plastic Working of Metals [in Russian], Metallurgizdat, Moscow (1947).
A. V. Stepanenko, L. A. Isaevich, A. A. Veremeichik, and T. A. Medvedeva, “Theoretical investigation of the process of cold extrusion of rods from unplasticized metal powders,” Poroshk. Metall., No. 5, 6–10 (1987); No. 6, 12–15 (1987); and No. 7, 6–11 (1987).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4(328), pp. 11–16, April, 1990.
Rights and permissions
About this article
Cite this article
Lozhechnikov, E.B., Tolstik, A.V., Kovalevich, Y.A. et al. Investigation of powder deformation and densification by the Moiré bands method. Powder Metall Met Ceram 29, 262–267 (1990). https://doi.org/10.1007/BF00797222
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00797222