Adhesion of a powder layer applied by the hot pressing method to a dense steel basis

Conclusions

  1. 1.

    A study was made of the process of bond formation between a powder layer and a dense basis during static hot pressing.

  2. 2.

    The mechanism responsible for mass transport in the bond zone during the reaction of a powder layer with a dense metal has been elucidated.

This is a preview of subscription content, access via your institution.

Literature cited

  1. 1.

    N. V. Avdeev, “Fundamental principles of metal deposition by welding,” in: Collection of Reports on Scientific Researches Carried Out in the Mechanical Department of the Tashkent Polytechnic Institute in 1972–1973 [in Russian], Vol. 102, Tashkent (1973), pp. 99–101.

    Google Scholar 

  2. 2.

    A. S. Troitskii, Principles of Metal Deposition by Spraying [in Russian], Gos. UzSSR, Tashkent (1960).

    Google Scholar 

  3. 3.

    V. A. Martynov, R. G. Berezin, V. P. Petrenko, and N. V. Avdeev, “A vibratory hot-pressing stand,” Poroshk. Metall., No. 9, 97–100 (1976).

    Google Scholar 

  4. 4.

    R. G. Berezin, V. A. Martynov, V. P. Petrenko, and N. V. Avdeev, “Determination of the adhesion of metal deposits to bases,” Zavod. Lab., No. 10, 1266–1268 (1974).

    Google Scholar 

  5. 5.

    V. M. Rozenberg, Principles of Heat Resistance of Metallic Materials [in Russian], Metallurgiya, Moscow (1973).

    Google Scholar 

  6. 6.

    É. S. Karakozov and Yu. V. Myakishev, “Assessment of the area of active centers in the cold-welding of nickel,” Fiz. Khim. Obrab. Mater., No. 3, 130–136 (1975).

    Google Scholar 

  7. 7.

    W. M. Lomer, “Point defects and diffusion in metals and alloys,” Proceedings of a Symposium on Vacancies and Other Defects in Metals and Alloys, Institute of Metals, London (1957), pp. 79–98.

    Google Scholar 

  8. 8.

    V. P. Alekhin, O. V. Gusev, and M. Kh. Shorshorov, “Causes of anomalous ductility in the initial stage of deformation,” Fiz. Khim. Obrab. Mater., No. 6, 50–54 (1969).

    Google Scholar 

  9. 9.

    V. S. Ivanova and V. F. Terent'ev, “Effect of the earlier flow in the surface layer on the fracture of metals and alloys,” Fiz. Khim. Obrab. Mater., No. 1, 79–89 (1970).

    Google Scholar 

  10. 10.

    Yu. L. Krasulin and I. Kh. Shorshorov, “Mechanism of bond formation between dissimilar materials in the solid state,” Fiz. Khim. Obrab. Mater., No. 1, 89–97 (1967).

    Google Scholar 

  11. 11.

    R. G. Morris, “Metallic contact formation and growth by dislocation glide,” Acta Met.,23, No. 4, 463–468 (1975).

    Google Scholar 

  12. 12.

    S. D. Gertsriken and I. Ya. Dekhtyar, Solid-Phase Diffusion in Metals [in Russian], Fizmatgiz, Moscow (1960).

    Google Scholar 

  13. 13.

    M. A. Krishtal, R. I. Dubrovskii, and O. V. Stepanova, “Diffusion of copper in iron during deformation,” Fiz. Khim. Obrab. Mater., No. 6, 88–93 (1973).

    Google Scholar 

Download references

Author information

Affiliations

Authors

Additional information

Translated from Poroshkovaya Metallurgiya, No. 11(179), pp. 71–75, November, 1977.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Berezin, R.G., Martynov, V.A., Petrenko, V.P. et al. Adhesion of a powder layer applied by the hot pressing method to a dense steel basis. Powder Metall Met Ceram 16, 875–878 (1977). https://doi.org/10.1007/BF00797047

Download citation

Keywords

  • Mass Transport
  • Bond Formation
  • Dense Basis
  • Pressing Method
  • Steel Basis