Literature cited
G. A. Meerson, “Current state of the theory of fundamental powder metallurgy processes,” in: Powder Metallurgy Problems [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1955), pp. 16–52.
W. Dawihl and W. Rix, “Beenflusing den Schwun des durch Zugkräfte beim Sintern von Metallpulvern,” Z. Metall.,40, No. 2, 115–117 (1949).
R. O. Andrievs'kii and I. M. Fedorchenko, “Plastic deformation phenomenon in the sintering of porous silver solids,” Dopovidi Akad. Nauk Ukr. RSR, No. 5, 531–534 (1958).
T. A. Mikryukova, “Investigation of shrinkage in sintering in a vertical furnace,” Tr. Gor'kovsk. Politekh. Inst.,24, No. 12, 25–31 (1968).
V. V. Skorokhod, Rheological Principles of Sintering Theory [in Russian], Naukova Dumka, Kiev (1972).
M. S. Koval'chenko, Theoretical Principles of Plastic Hot Working of Porous Materials [in Russian], Naukova Dumka, Kiev (1980).
Ya. E. Geguzin, V. P. Matsokin, D. V. Pluzhnikova, and Fayad Hussein, “Creep of porous compacts under the action of a uniaxial tensile stress during heating. I. Mechanism of creep of high-porosity compacts,” Poroshk. Metall., No. 11, 13–19 (1986).
Ya. E. Geguzin, V. P. Matsokin, D. V. Pluzhnikova, and Fayad Hussein, “Creep of porous compacts under the action of a uniaxial tensile stress during heating. II. Correlation between shrinkage and uniaxial creep,” Poroshk. Metall., No. 2, 39–42 (1987).
I. M. Fedorchenko and R. A. Andrievskii, Principles of Powder Metallurgy [in Russian], Izd. Akad. Nauk Ukr. SSR, Kiev (1961).
Ya. E. Geguzin, The Physics of Sintering [in Russian], Nauka, Moscow (1984).
W. Schatt, J. Boiko, and E. Friedrich, “Shrinkage by particle sliding in sintering powder compacts,” Powder Metall. Int.,16, No. 1, 9–11 (1984).
W. Schatt and E. Friedrich, “Processes at the sintering contact,” Sci. Sintering, No. 5, 63–72 (1984).
V. V. Skorokhod and S. M. Solonin, Physicometallurgical Principles of Powder Sintering [in Russian], Metallurgiya, Moscow (1984).
R. A. Andrievskii and S. É. Zeer, “Zonal separation in the sintering of an ultrafine nickel powder,” Poroshk. Metall., No. 7, 39–42 (1985).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 11(311), pp. 11–13, November, 1988.
Rights and permissions
About this article
Cite this article
Andrievskii, R.A. Effect of uniaxial stresses on sintering shrinkage. Powder Metall Met Ceram 27, 847–849 (1988). https://doi.org/10.1007/BF00796962
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796962