Soviet Powder Metallurgy and Metal Ceramics

, Volume 23, Issue 8, pp 632–635 | Cite as

Modulus of elasticity of porous molybdenum-copper pseudoalloy materials

  • L. I. Chernyshev
  • G. R. Fridman
  • N. E. Fedorova
Test Methods and Properties of Powder Metallurgical Materials


An optimum modulus of elasticity is exhibited by molybdenum-copper pseudoalloys containing 35–37% Cu. The modulus of elasticity of the materials investigated is determined not only by their total porosity but also by the character of pore size distribution in them.


Porosity Pore Size Pore Size Distribution Total Porosity Optimum Modulus 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    M. Yu. Bal'shin, Scientific Principles of Powder and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).Google Scholar
  2. 2.
    L. D. Landau and E. M. Lifshitz, Theory of Elasticity, Addison-Wesley (1971).Google Scholar
  3. 3.
    M. Yu. Bal'shin and S. G. Fedorov, “Contact and elastic characteristics of P/M copper,” Izv. Akad. Nauk SSSR, Met., No. 1, 166–170 (1965).Google Scholar
  4. 4.
    V. A. Kuz'menko, New Modes of Working of Solids [in Russian], Naukova Dumka, Kiev (1973).Google Scholar
  5. 5.
    V. V. Skorokhod, “Calculation of the elastic isotropic moduli of disperse elastic mixtures,” Poroshk. Metall., No. 1, 3–8 (1961).Google Scholar
  6. 6.
    A. Y. Artamonov, V. A. Danilenko, and Yu. A. Kashtalyan, “The effect of porosity on the Poisson's ratio of porous iron,” Poroshk. Metall., No. 1, 42–43 (1964).Google Scholar
  7. 7.
    V. V. Shorokhod, M. Ya. Kutser, and G. R. Fridman, “Investigation of the properties of sintered materials by USV method,” in: Powder Metallurgy [in Russian], Vol. 1, Vysheish. Shkola, Minsk (1977), pp. 107–122.Google Scholar
  8. 8.
    A. S. Berkman and I. G. Mel'nikova, Porous Permeable Ceramics [in Russian], Izd. Lit. Stroit., Leningrad (1969).Google Scholar
  9. 9.
    V. V. Skorokhod, S. M. Solonin, and L. I. Chernyshev, “Mechanism of the sintering of highporosity materials in the presence of a volatile pore-forming agent,” Poroshk. Metall., No. 11, 31–36 (1974).Google Scholar
  10. 10.
    R. Hill, “Elastic properties of reinforced solids: Some theoretical principles,” J. Mech. Phys. Solids,11, 357–372 (1963).Google Scholar
  11. 11.
    L. Frölich and H. Hoffmann, “Untersuchungen zur Bestimmung der Schallgeschwindigkeit mehrphasiger Werkstoffe,” Wiss. Z. Tech. Hochschule Otto von Guericke Magdeburg,16, No.1, 11–22 (1972).Google Scholar
  12. 12.
    G. D. McAdam, “Some relations of powder characteristics to the elastic modulus and shrinkage of sintered ferrous compacts,” J. Iron Steel Inst.,168, No. 8, 346–358 (1951).Google Scholar

Copyright information

© Plenum Publishing Corporation 1985

Authors and Affiliations

  • L. I. Chernyshev
    • 1
    • 2
  • G. R. Fridman
    • 1
    • 2
  • N. E. Fedorova
    • 1
    • 2
  1. 1.Institute of Materials ScienceAcademy of Sciences of the Ukrainian SSRUkraine
  2. 2.Belorussian Republican Powder Metallurgy Scientific-Production AssociationUSSR

Personalised recommendations