Literature cited
I. M. Fedorchenko, “Modern concepts of the mechanism of friction and wear and basic tendencies in the development of composite materials for tribological purposes,” Poroshk. Metall., No. 4, 53–60 (1979).
A. S. Drachinskii, A. E. Kushchevskii, A. V. Perepelkin, et al., “The influence of porosity on the crack resistance of powder metallurgy iron,” ibid., No. 12, 80–84 (1982).
All-Union State Standard (GOST) 9489-74, Iron Powder [in Russian], introduced 1/1/76.
All-Union State Standard (GOST) 4404-78, Graphite for the Production of Pencil Rods [in Russian], introduced 1/1/80.
I. M. Fedorchenko, A. K. Gaiduchenko, V. V. Pushkarev, et al., “The standardization of sintered antifriction materials,” Poroshk. Metall., No. 4, 65–69 (1977).
The Properties of the Powders of Metals, Refractory Compounds, and Sintered Materials, Third Edition Corrected and Supplemented [in Russian], Naukova Dumka, Kiev (1978).
A. S. Drachinskii, A. E. Kushchevskii, T. F. Mozol', and Yu. N. Podrezov, “The influence of the scale factor on the results of determination of the mechanical properties of iron-base powder metallurgy materials,” Poroshk. Metall., No. 3, 88–93 (1983).
D. A. Hills and D. W. Ashelby, “The initiation of wear cracks,” Wear,70, No. 3, 365–371 (1981).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(257), pp. 72–75, May, 1984.
Rights and permissions
About this article
Cite this article
Fedorchenko, I.M., Kushchevskii, A.E., Pushkarev, V.V. et al. Influence of porosity on the tribological properties of iron-base powder metallurgy materials. Powder Metall Met Ceram 23, 394–396 (1984). https://doi.org/10.1007/BF00796607
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796607