Conclusions
The method of thermal analysis was used to study the structure of three polythermal sections of the constitution diagram of the system titanium-copper-silver: at 5 at.% Ag, at 60 at.% Ag, and the radial section TiAg (η)-Cu. On the basis of these polythermal sections and of the liquidus surface, isothermal sections of the system titanium-copper-silver at 1300, 1005, 960, and 900°C have been constructed. The processes taking place in the ternary system titanium-copper-silver and in the bounding binary systems have been represented in the form of a diagram.
Similar content being viewed by others
Literature cited
V. N. Eremenko, Yu. I. Buyanov, and S. B. Prima, Poroshkovaya Met., No. 6, 77 (1966).
V. N. Eremenko, Yu. I. Buyanov, and N. M. Panchenko, Poroshkovaya Met., No. 7 (1969).
V. N. Eremenko, Yu. I. Buyanov, and N. M. Panchenko, Izv. Akad. Nauk SSSR, Metally, No. 5 (1969).
V. N. Eremenko, Yu. I. Buyanov, and N. M. Panchenko, Izv. Akad. Nauk SSSR, Metally, No. 3, 190 (1969).
V. N. Eremenko, Yu. I. Buyanov, and N. M. Panchenko, Poroshkovaya Met., No. 4 (1970).
M. Hansen and K. P. Anderko, Constitution of Binary Alloys, McGraw-Hill, New York (1957).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(89), pp. 73–78, May, 1970.
Rights and permissions
About this article
Cite this article
Eremenko, V.N., Buyanov, Y.I. & Panchenko, N.M. Polythermal and isothermal sections of the system titanium-copper-silver. Part II. Powder Metall Met Ceram 9, 410–414 (1970). https://doi.org/10.1007/BF00796511
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796511