Literature cited
N. I. Shcherban', Poroshkovaya Met., No. 9 (1973).
H. Neuber, Stress Concentration [Russian translation], Gostekhizdat, Moscow (1947).
V. V. Panasyuk, The Limiting Equilibrium of Brittle Solids with Cracks [in Russian], Naukova Dumka, Kiev (1968).
S. V. Serensen, V. P. Kogaev, and R. M. Shneiderovich, Load-Carrying Capacity and Calculation of the Strength of Components [in Russian], Mashgiz, Moscow (1963).
V. S. Postnikov, in: Relaxation Phenomena in Solids [in Russian], Metallurgiya, Moscow (1968), p. 11.
Ya. E. Geguzin, The Physics of Sintering [in Russian], Nauka, Moscow (1967), p. 85.
Yu. G. Dorofeev, Dynamic Hot Pressing of Porous Materials [in Russian], Nauka, Moscow (1968), p. 101.
V. Z. Bugakov, Diffusion in Metals and Alloys [in Russian], GITTL, Moscow (1949).
S. G. Tresvyatskii, Poroshkovaya Met., No. 4, 63 (1968).
S. G. Tresvyatskii, V. D. Tkachenko, and E. P. Garmash, Izv. Akad. Nauk SSSR, Neorgan., Mat.,7, No. 10 (1971).
S. G. Tresvyatskii, V. D. Tkachenko, and E. P. Garmash, Poroshkovaya Met., No. 2 (1971).
S. G. Tresvyatskii (Tresvjatskij), V. D. Tkachenko, and E. P. Garmash, Physics of Sintering, Special Issue (1971), p. 257.
I. D. Radomysel'skii, in: Powder Metallurgy in Machine and Instrument Construction [in Russian], Mashprom, Kiev (1961), p. 11.
A. F. Beloivan, G. V. Isakhanov, et al., Poroshkovaya Met, No. 5, 41 (1966).
A. P. Bogdanov, Powder Met.,20, No. 24, 67 (1967).
G. D. McAdam, J. Iron Steel Inst.,168, No. 4, 346 (1951).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 10 (130), pp. 70–77, October, 1973.
Rights and permissions
About this article
Cite this article
Shcherban', N.I. Effect of technological factors upon the mechanical properties of porous materials produced by powder metallurgy techniques. Powder Metall Met Ceram 12, 834–840 (1973). https://doi.org/10.1007/BF00796461
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796461