Literature cited
R. A. Andrievskii, Introduction into Powder Metallurgy [in Russian], Ilim, Frunze (1988).
M. Yu. Bal'shin, Powder Metallurgy [in Russian], Metallurgizdat, Moscow (1948).
M. Yu. Bal'shin, Scientific Fundamentals of Powder Metallurgy in Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
N. I. Shcherban', “Structural and energy aspects of the mechanical properties of powder materials,” in: New Technological Processes in Powder Metallurgy [in Russian], Inst. Probl. Materialoved., Akad. Nauk Ukr. SSR, Kiev (1986).
V. V. Skorokhod, “Physicomechanical properties of porous materials,” in: Powder Metallurgy-77 [in Russian], Naukova Dumka, Kiev (1977), pp. 120–129.
V. T. Troshchenko and V. N. Pudenko, Strength of Cermet Materials and Methods of Determining It [in Russian], Tekhnika, Kiev (1965).
M. S. Koval'chenko, “Mechanical properties of sintered materials,” Poroshk. Metall., No. 3, 101–106 (1991).
M. V. Shtern, “A model of deformation processes of compressed materials taking into account pore formation. I. Uniaxial tension and compression of porous bodies,” Poroshk. Metall. No. 6, 34–38 (1989).
A. Van den Bekkel, “Grain sized dependence of the dislocations in cold-worked metals,” Scripta Metal12, No. 8, 809–813 (1978).
I. I. Papirov, Nature of Plastic Deformation of Beryllium [in Russian], Naukova Dumka, Kiev (1977).
V. I. Trefilov, I. D. Gornaya and V. F. Moiseev, ”Determination of the boundaries of structural states using the loading curves,” Dokl. Akad. Nauk Ukr. SSR, Ser. A., No. 5, 83–86 (1985).
F. R. N. Nabarro, Z. S. Bazinskii, and B. D. Holt, Ductility of Pure Single Crystals [in Russian], Metallurgiya, Moscow (1967).
I. D. Gornaya, “Special features of strain hardening and fracture of irons based on molybdenum, vanadium, and iron,” Author's abstract for Candidate of Physicomathematical Sciences, Kiev (1983).
W. Martin, Micromechanisms of Dispersion Hardening of Alloys [Russian translation], Metallurgiya, Moscow (1983).
F. McClintock, and A. Argon, Deformation and Failure of Materials [Russian translation], Mir, Moscow (1970).
V. I. Trefilov and V. F. Moiseev, Dispersed Particles in Refractory Metals [in Russian], Naukova Dumka, Kiev (1978).
A. S. Drachinskii, A. E. Kushchevskii, Yu. N. Podrezov, and S. A. Firstov, “Strain hardening and failure of powder iron,” Poroshk. Metall., No. 10, 78–83 (1984).
S. A. Firstov, Yu. N. Podrezov, and L. G. Shtyka, “Effect of porosity on microplastic deformation in porous materials based on iron,” Poroshk. Metall., No. 7, 79–84 (1989).
S. A. Firstov, Yu. N. Podrezov, A. G. Zherdin, et al., “Effect of porosity on ductility and the ductile fracture mechanism of powder iron,” Poroshk. Metall. No. 10, 90–96 (1987).
G. Gerland and N. M. Parich, “Microstructural aspects of failure of 2-phase alloys,” in: Fracture [Russian translation], Vol. 7, Mir, Moscow (1976).
L. K. Phani, and S. K. Niyogi, “Elastic modulus-porosity relationship in brittle solids,” in: High Tech, Ceram.: Proc. World Congr. 6th Int. Meet. Mod. Ceram. Technol. (Milan, June 24–28, 1986), Amsterdam (1987), pp. 1391–1404.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 5(353), pp. 95–99, May, 1992.
Rights and permissions
About this article
Cite this article
Firstov, S.A., Podrezov, Y.N., Lugovoi, N.I. et al. Effect of porosity on the fracture stress of powder materials in the ductile fracture mechanism. Powder Metall Met Ceram 31, 451–455 (1992). https://doi.org/10.1007/BF00796260
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796260