Literature cited
A. D. Panasyuk, V. S. Fomenko, and G. G. Glebova, The Resistance of Nonmetallic Materials in Molten Materials. A Handbook [in Russian], Naukova Dumka, Kiev (1986).
R. Edwards and T. Raine, “The solid solubilities of some stable carbides in cobalt, nickel, and iron at 1250°V,” Pulvermetallurgie: Proceedings of the 1st Plansee Seminar (Plansee, 1952), Wien (1953), pp. 232–243.
O. Moskowitz, M. Ford, and Ir. Humenik, “High-strength tungsten carbides,” Mod. Develop. Powder Met.,5, 225–234 (1971).
F. Tyummler, G. Khollek, and L. Prakash, “New accomplishments in the area of investigations of sintered hard alloys,” in: Progressive Production Operations in Powder Metallurgy: Papers of the All-Union Conference (Minsk, May 26–28, 1981) [in Russian], Nauka i Tekhnika, Minsk (1982), pp. 120–134.
D. S. Arensburger and Ya. P. Kyubarsepp, “A study of the conditions of grinding of TiC-Fe-Cr powder mixtures,” Poroshk. Metall., No. 10, 6–10 (1978).
V. A. Fal'kovskii and Kh. D. Reshetnyak, “The wear and service life of hard alloys in blanking,” in: The Structure and Properties of Hard Alloys [in Russian], Metallurgiya, Moscow (1983), pp. 41–44.
G. S. Kreimer, The Strength of Hard Alloys [in Russian], Metallurgiya, Moscow (1971).
P. A. Boiko, V. V. Bovkun, and S. V. Varava, “The conditions of production and properties of titanium carbide-base hard alloys with Fe-Ni-Mo- and Fe-Cr-Mo-binders,” in: The Technology of Electrical Equipment Production [in Russian], No. 2 (1980), pp. 6–8.
S. S. Kiparisov, V. K. Narva, and N. S. Loshkareva, “The production and properties of titanium carbide-base wear resistant materials with a binder of multialloyed steels,” in: Sintered Wear-Resistant Materials: Scientific Works of the Moscow Institute of Steel and Alloys [in Russian], Metallurgiya, Moscow (1977), pp. 49–51.
S. S. Kiparisov, V. K. Narva, and S. Ya. Kolupaev, “The influence of the composition of titanium carbide on the properties of titanium carbide-steel materials,” Poroshk. Metal., No. 7, 41–44 (1975).
I. D. Bykov, G. L. Dubrov, Yu. F. Boikii, et al., “Experience in the production of tools from steel-bonded carbides,” ibid., No. 5, 40–44 (1984).
E. Niki, S. Kohara, and K. Tatsuzawa, “Sintering and some properties of iron-bonded titanium carbides,” Rep. Aeronut. Res. Inst. Univ. Tokyo,29, No. 9, 135–143 (1964).
V. A. Ivensen, The Phenomenology of Sintering and Certain Questions of Theory [in Russian], Metallurgiya, Moscow (1985).
M. G. Loshak, The Strength and Life of Hard Alloys [in Russian], Naukova Dumka, Kiev (1984).
I. N. Chaporova, V. I. Kudryavtseva, and A. V. Varaksina, “An investigation of the structure and properties of WC-Fe-Ni system alloys,” in: Hard Alloys. Scientific Works of the All-Union Scientific-Research Institute for Hard Alloys [in Russian], Metallurgiya, Moscow (1973), pp. 84–91.
G. V. Samsonov, G. T. Dzodziev, L. I. Klyachko, et al., “The influence of molybdenum on the properties of TiC-Ni cermet hard alloys,” Poroshk. Metall., No. 4, 57–60 (1972).
N. N. Sereda, M. S. Koval'chenko, I. T. Belik, et al., “The use of titanium carbide-base hard alloys as wear resistant materials and a cutting tool,” ibid., No. 5, 94–97 (1977).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 10(322), pp. 75–79, October, 1989.
Rights and permissions
About this article
Cite this article
Kyubarsepp, Y.P., Annuka, K.I. Bend and impact strengths of steel-bonded carbides. Powder Metall Met Ceram 28, 805–809 (1989). https://doi.org/10.1007/BF00796179
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796179