Literature cited
S. S. Ordan'yan, A. I. Dmitriev, and K. T. Biziev, “Interaction in B4C-MevB2 systems,” Poroshk. Metall., No. 10, 66–70 (1987).
J. Echigoya and H. Takabajashiy Suto, “Hardness and fracture toughness of directionally solidified Al2O3-ZrO3 (Y2O3) eutectics,” J. Mater. Sci. Lett.,5, No. 2, 153–154 (1986).
E. W. Kruse and M. E. Fine, “Precipitation strengthening of MgO by MgFe2O4,” J. Am. Ceram. Soc.,55, No. 1, 32–37 (1972).
W. S. Williams, “Dispersion hardening of TiC by boron doping,” Trans. Met. Soc. AIME,236, No. 2, 211–216 (1966).
M. Komac, T. Kosmac, M. Drofenik, et al., “TaC-base refractory materials and hard metals,” in: P/M 78: 5th European Symposium on Powder Metallurgy (Stockholm, 1978).
G. B. Bokii, G. N. Bezrukov, Yu. A. Klyuev, et al., Natural and Synthetic Diamonds [in Russian], Nauka, Moscow (1986).
T. Goscinska and J. Auleytner, “Influence of chromium and titanium oxide dopants on the real structure and the mechanical properties of corundum single crystals,” Krist. und Techn.,14, No. 7, 783–795 (1979).
R. W. Rice, Treatise on Material Science and Technology, No. 11, New York (1977), pp. 199–381.
V. N. Eremenko and T. Ya. Velikanova, “The use of phase diagrams of ternary systems of metals containing carbides in development of high-temperature strength hard alloys,” Poroshk. Metall., No. 12, 55–68 (1983).
K. K. Strelov, “The properties of crystals of partially stabilized zirconium dioxide,” Ogneupory, No. 6, 5–6 (1988).
G. S. Oleinik and M. L. Gorb, “Investigation of the strength of polycrystalline silicon carbide,” Poroshk. Metall., No. 12, 79–83 (1974).
P. S. Kislyi, M. A. Kuzenkova, A. V. Kurdyumov, et al., “The structure and features of fracture of recrystallized AlN,” in: The Physics of Fracture. Summaries of Papers for the Fourth All-Union Conference [in Russian], Inst. Probl. Materialoved. Akad. Nauk UkrSSR, Kiev (1980), pp. 280–282.
R. H. J. Hannink and M. J. Murrary, “The effect of domain size on the hardness of ordered VCd−0.84” Acta Met.,20, No. 1, 123–131 (1972).
R. S. DeVries, “Plastic deformation and work hardening of diamons,” Mater. Res. Bull.,10, No. 11, 1193–1198 (1975).
V. I. Trefilov, Yu. F. Mil'man, and I. V. Gridneva, “The mechanical properties of covalent crystals,” Izv. Akad. Nauk SSSR, Neorg. Mater.,20, No. 6, 958–966 (1984).
W. M. Sherry and J. B. Vander Sande, “Microstructural characterization of calcium fluoride single crystals deformed in steady state,” J. Mater. Sci.,16, No. 6, 1477–1489 (1981).
G. Ya. Akimov, V. I. Zaitsev, and V. A. Strel'tsov, “Strain hardening of hydrostatically compressed single crystals,” Ukr. Fiz. Zh.,25, No. 11, 1917–1919 (1980).
A. P. Garshin and G. S. Oleinik, “The influence of boron on the microstructure and microhardness of polycrystalline silicon carbide,” Abrazivy, No. 9, 4–9 (1975).
R. A. Andrievskii, I. I. Spivak, and V. V. Klimenko, “The display of superplasticity of refractory compounds,” Dokl. Akad. Nauk SSSR,203, No. 6, 1279–1281 (1972).
I. I. Spivak, R. A. Andrievskii, and V. V. Klimenko, “The creep of two-phase TiC alloys,” Poroshk. Metall., No. 3, 93–97 (1974).
S. S. Ordan'yan, V. I. Unrod, and A. I. Avgustinnik, “Interaction in the TiCx-TiB2 system,” ibid., No. 9, 40–43 (1975).
I. I. Spivak, R. A. Andrievskii, and V. D. Lazorenko, “Investigation of creep in TiB2-TiC and ZrB2-ZrN binary systems,” ibid., No. 8, 17–21 (1974).
S. S. Ordan'yan, A. I. Dmitriev, and E. K. Stepanenko, “The SiC-TiB2 system — the basis of high-hardness wear-resistant materials,” ibid., No. 5, 32–34 (1987).
J. Stamenkovic, G. Ondracek, and O. Vohringer, “The influence of eutectic compositions on the sintering temperature of alumina-titania ceramics (Al2O3-TiO2),” Berichte DKG,64, No. 5, 154–156 (1987).
Jun-ichi Echigoya and Hajime Suto, “Structure of interphase interface and solute segregation in directionally solidified MgO-ZrO2 eutectic,” Trans. Jpn. Inst. Met.,27, 213–220, 377–378 (1986).
M. Lancin, “β → α phase transformation in sintered SiC involving feather formation,” J. Mater. Sci.,22, No. 4, 1150–1156 (1987).
J. J. Rassmussen and W. D. Kingery, “Effect of dopants on the defect structure of singlecrystal aluminum oxide,” J. Am. Ceram. Soc.,53, No. 8, 436–440 (1970).
V. K. Sul'zhenko, M. A. Kuzenkova, and G. S. Oleinik, “The influence of temperature on the strength of aluminum nitride,” in: High-temperature Nitrides and Materials Based on Them [in Russian], Inzt. Probl. Materialoved. Akad. Nauk UkrSSR, Kiev (1985), pp. 80–85.
M. Brun and V. S. Stubican, “Precipitation studies in the system WC-ZrC,” J. Am. Ceram. Soc.,57, No. 3, 117–119 (1974).
S. E. Hsu, W. Kobes, and M. Fine, “Strengthening of sapphire by precipitates containing titanium,” ibid.,50, No. 3, 149–151 (1967).
S. V. Kuo, A. V. Virkar, and W. Rafaniello, “Modulated structures of SiC-AlN ceramics,” ibid.,70, No. 6, 125–128 (1987).
Takelo Sakuma, “Spinodal decomposition in ceramic materials,” Tetsu to Hagane, J. Iron Steel Inst. Jpn.,73, No. 11, 1153–1160 (1987).
F. Y. Wahd Franklin and P. Gupta Kedar, “Phase transformation in the oxides,” Met. Trans.,4, No. 12, 2767–2779 (1973).
T. Sakuma, V. Voshizawa, and H. Suto, “The modulated structure formed by isothermal aging in ZrO2-5.2 mol.% Y2O3 alloy,” J. Mater. Sci.,20, No. 3, 1084–1087 (1985).
A. N. Pilyankevich, G. S. Oleinik, and V. F. Britun, “The role of polymorphic and polytype transformations in the structure formation of covalent substance-base materials,” in: Materials of the Seventh Conference on Powder Metallurgy in Poland, Cracow, 88 [in Russian], Vol. 2, pp. 521–530.
M. Ruhle and A. H. Heur, “Microstructural evolution in a ZrO2-12 wt.% Y2O3 ceramic,” J. Am. Ceram. Soc.,68, No. 8, 427–431 (1985).
R. H. Hannink, M. J. Murray, and M. E. Packer, “Observations on the domain structures of V6C5,” Philos. Mag.,24, No. 191, 1179–1195 (1971).
J. P. Marniroli, M. Krachfi, A. Courtols, and M. Gantoins, “Observations of nonperiodic and periodic defect structures in M7C3 carbides,” ibid.A56, No. 1 (1987).
G. R. Venk (general editor), Electron Microscopy in Mineralogy [Russian translation], Mir, Moscow (1979).
R. Chang and C. G. Rhodes, “High-pressure hot pressing of uranium carbide powders and mechanism of sintering of refractory bodies,” J. Am. Ceram. Soc.,45, No. 8, 379–382 (1962).
J. S. Haggerty and D. W. Lee, “Plastic deformation of ZrB2 single crystals,” ibid.,54, No. 11, 572–576 (1971).
J. Billingham and M. U. Lewis, “Dislocation mechanisms for the nucleation of transformations in vanadium carbide,” Philos. Mag.,24, No. 188, 231–240 (1971).
A. N. Pilyankevich, V. F. Britun, and G. S. Oleinik, “Microstructural features of fragmentation of covalent crystals at high pressures and temperatures,” Dokl. Akad. Nauk UkrSSR, Ser. A, No. 4, 81–84 (1989).
V. I. Labes, S. I. Futergendler, I. V. Lavrov, and E. G. Shchelacheva, “The influence of thermal shock on the substructure and strength of single crystals of cubic BN,” Probl. Prochn., No. 5, 73–76 (1983).
J. S. Spiziy, “He isostatisches pressen für bessere Werkstoffe oder zum folgen,” Werstatt und Betrieb,117, No. 3, 179–180 (1984).
A. G. Lanin, V. N. Turchin, A. B. Emel'yanov, et al., “The influence of programmed strengthening on the mechanical properties of zirconium carbide,” Fiz. Khim. Obrab. Mater., No. 2, 88–92 (1982).
H. C. Heard and C. F. Cline, “Mechanical behavior of polycrystalline BeO, Al2O3, and AlN at high pressure,” J. Mater. Sci.,15, No. 8, 1889–1897 (1980).
J. M. Brusso, D. E. Mikkola, and J. E. Flinn, “Dislocations generation in alumina deformed by impact loading,” Ser. Met.,22, No. 1, 47–52 (1988).
Osamu Vamada, “High-pressure self-combustion sintering of titanium carbide,” J. Am. Ceram. Soc.,70, No. 9, 206–208 (1987).
R. W. Rice, W. J. McDonough, G. Y. Richardson, et al., “Hot rolling of ceramics using self-propagating high temperature synthesis,” Ceram. Eng. Sci. Proc.,7, No. 7–8, 751–760 (1986).
A. H. Heuer, D. I. Sellers, and W. H. Rhodes, “Hot-working of aluminum oxide. I. Primary recrystallization and texture,” J. Am. Ceram. Soc.,52, No. 9, 468–474 (1969).
R. W. Rice, “Deformation, recrystallization, strength and fracture of press-forged ceramic crystals,” J. Am. Ceram. Soc.,55, No. 2, 90–97 (1972).
R. W. Rice and J. G. Hunt, “Hot extrusion of MgO,” Am. Ceram. Soc. Bull.,43, No. 4, 297–282 (1964).
A. G. Lanin, V. N. Turchin, O. N. Erin, and S. N. Sul'yanov, “Recrystallization of zirconium carbide,” Poroshk. Metal., No. 2, 86–92 (1986).
T. A. Parthasarathy and P. G. Shewmon, “Diffusion induced recrystallization of NiO,” Acta Met.,32, No. 1, 29–33 (1984).
A. N. Pilyankevich and G. S. Oleinik, “The role of recrystallization in the structure formation of ceramic materials,” in: Proceedings of the Seventh International Conference on Powder Metallurgy in the Czechoslovak SSR, Pardubice, 1987 [in Russian], Vol. 1 (1987), Vol. 1, pp. 79–86.
A. N. Pilyankevich and G. S. Oleinik, “Structure formation of polycrystalline superhard materials at high pressures and temperatures,” in: The Influence of High Pressures on a Substance [in Russian], Vol. 1, Naukova Dumka, Kiev (1987), pp. 57–77.
Author information
Authors and Affiliations
Additional information
Deceased.
Translated from Poroshkovaya Metallurgiya, No. 1(325), pp. 35–42, January, 1990.
Rights and permissions
About this article
Cite this article
Pilyankevich, A.N., Oleinik, G.S. & Britun, V.F. Structural mechanisms of dispersion of the grain structure in ceramic materials. Powder Metall Met Ceram 29, 30–37 (1990). https://doi.org/10.1007/BF00796090
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00796090