Literature cited
V. P. Bondarenko, K. I. Sirota, A. A. Orap, et al., “Study of the effect of the composition of sintered materials based on hard alloys of the VN group on the structure, physicomechanical properties, and operating capacity in a friction pair,” in: Technology for Preparing Hard Alloys Articles [in Russian], Inst. Sverkhtverdykh Materialov, Akad. Nauk UkrSSR, Kiev (1980).
V. P. Bondarenko, A. M. Baranovskii, A. P. Khalepa, et al., “Study of the corrosion resistance of composite materials based on hard alloys in nitrine,” in: Dissociating Gases as a Heat Carrier and Working Body of Atomic Power Stations (Part 4) [in Russian], Inst. Yadernoi Energetiki, Akad. Nauk BelSSR, Minsk (1982).
V. P. Bondarenko, K. I. Sirota, A. M. Baranovskii, et al., “Effect of production parameters on the structure and properties of composite materials of the VNG type and experience of using them in friction pairs lubricated by low-viscosity liquids,” in: Future for Improving the Life and Reliability of Operating Friction Pairs Lubricated by Working Media [in Russian], Inst. Sverkhtverdykh Materialov, Akad. Nauk UkrSSR, Kiev (1987).
V. P. Bondarenko, A. A. Pelinskii, Yu. A. Kozakov, et al., “Operating capacity of VNG-composites in axial bearing lubricated with water,” Trenie i Iznos, No. 2, 281–287 (1987).
V. I. Tret'yakov, Bases of Physical Metallurgy and the Production Technology for Sintered Hard Alloys [in Russian], Metallurgiya, Moscow (1976).
V. A. Maslyuk, “Development and study of the properties and introduction of carbide-chromium hard alloys containing phosphorus,” Author's Abstr. Diss. Cand. Tech. Sci., Kiev (1976).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4(340), pp. 85–89, April, 1991.
Rights and permissions
About this article
Cite this article
Bondarenko, V.P., Delevi, V.G., Demyanchuk, A.V. et al. Formation of tungsten-chromium-nickel hard alloy structure. Powder Metall Met Ceram 30, 335–338 (1991). https://doi.org/10.1007/BF00795969
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795969