This is a preview of subscription content, log in via an institution to check access.
Literature cited
M. Shlessar, é. Dubrova, and M. Bestertsi, “Growth of interparticle bonds during sintering of powder copper,” Poroshk. Metall., No. 7, 100–105 (1982).
M. Shlessar and é. Dubrova, “Plane porosity as a characteristic parameter of the structure of sintered materials,” in: Materials of the VII Internat. Conf. on Powder Metallurgy (Pardubitse, 10–14 Oct., 1987), Vol. 3, Pardubitse (1987).
M. Shlessar, “Formation and evolution of interparticle contacts with sintering of atomized powders,” in: Processes of Mass Transfer During Sintering [in Russian], Naukova Dumka, Kiev (1987).
T. F. Volynova, “Features of failure and the condition of boundaries in powder materials,” Poroshk. Metall., No. 5, 66–71 (1989).
T. P. Moskvina, A. P. Gulyaev, and T. F. Volynova, “Features of the structure of powder steel fractures,” Metalloved. Term. Obrab. Met., No. 2, 30–33 (1989).
Yu. G. Dorofeev, V. Yu. Dorofeev, S. N. Egorov, et.al., “Joining at contact surfaces with different production versions of hot pressing,” Poroshk. Metall., No. 10, 31–34 (1986).
V. V. Skorokhod and S. M. Solonin, Physicometallurgical Bases of Sintering Powders [in Russian], Metallurgiya, Moscow (1984).
V. V. Skorokhod and S. M. Solonin, “Kinetics of interparticle contact growth during sintering of unpressed powders,” Poroshk. Metall., No. 2, 72–79 (1977).
G. R. Fridman, “Study of the macrodefectiveness of sintered and plastically deformed powder materials by the USW method,” Author's Abstr. Diss. Cand. Phys.-Mat. Sci., Minsk (1976).
M. Yu. Bal'chin, Scientific Bases of Powder Metallurgy and Fiber Metallurgy [in Russian], Metallurgiya, Moscow (1972).
I. D. Radomysel'skii, Yu. V. Mil'man, Yu. N. Ivashchenko, et al., “Segregation of impurity elements in porous iron,” Proshk. Metall., No. 3, 96–100 (1986).
B. Yu. Dorofeev, V. Yu. Dorofeev, Yu. N. Ivashchenko, et al., “Processes of joining in powder hot-pressed materials based on iron (Communications),” Proshk. Metall., 1, “Research procedure and general characteristics of specimens,” No. 6, 27–32; 2, “Segregation of impurities at failure surfaces,” No. 7, 53–56; 3, “Effect of impurity segregation on failure processes,” No. 8, 36–40(1988).
A. V. Krainikov, Yu. N. Ivashchenko, A. A. Malyshenko, et al., “Distribution of impurities at failure surfaces and the mechanical properties of powder iron,” Proshk. Metall., No. 9, 81–88 (1988).
N. Ch. Pioro, é. Ch. Pioro, A. G. Zherdin, and V. P. Smirnov, “Structure and morphological studies of atomized iron powder (Communication),” Poroshk. Metall, 1, “Study of raw powders,” No. 7, 7–11; 2, “The corallike structure of iron powder particles and a possible mechanism for its formation,” No. 8, 16–22 (1985).
B. Ya. Pines, “Sintering in the solid phase,” Zh. Tekh. Fiz.,16, No. 6, 737–745 (1946).
M. P. Seah, “Grain boundary segregation,” J. Phys. F. Metal. Phys.,10, 1043–1063 (1980).
E. D. Hondros and M. P. Seah, “Segregation to interfaces,” Int. Metal. Rev.,22, 262–301 (1977).
C. J. McMahon and V. Vitec Jr., “The effect of segregated impurities on intergranular fracture energy,” Acta Met.,27, 507–513 (1979).
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4(340), pp. 78–85, April, 1991.
Rights and permissions
About this article
Cite this article
Firstov, S.A., Ivashchenko, Y.N., Malyshenko, A.A. et al. Interparticle failure of iron powder materials. Powder Metall Met Ceram 30, 329–335 (1991). https://doi.org/10.1007/BF00795968
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795968