Literature cited
A. N. Pilyankevich, G. S. Oleinik, and N. F. Ostrovskaya, “Fracture structure of polycrystalline silicon carbide,” Dopovidi Akad. Nauk Ukr. RSR, No. 11, Ser. A, 1038–1041 (1976).
G. G. Gnesin and A. N. Pilyankevich, “Microscopical investigation of the mechanism of structure formation and fracture in silicon carbide produced by the reactive sintering process,” Neuere Werkstoffentwicklungen in der Pulvermetallurgie, Vol. 2, Dresden (1969).
C. D. Swansen, “Fracture energies of ceramics,” J. Am. Ceram. Soc.,55, No. 1, 48–49 (1972).
Yu. S. Veselyanskii, A. P. Gorushkina, et al., “Brittle fracture of the fcc matrix in an Al-Al3Ni composite,” Fiz. Khim. Obrab. Mater., No. 4, 79–82 (1975).
N. V. Belov and M. V. Klassen-Neklyudova, “The character of crystal rupture,” Zh. Tekh. Fiz.,13, 265–278 (1948).
J. J. Gilman, “Cleavage, plasticity, and toughness of crystals,” in: Atomic Mechanism of Fracture [Russian translation], Metallurgizdat, Moscow (1963), pp. 220–233.
M. H. Richman, “Calculation of cleavage characteristics of hexagonal-close-packed crystals,” Trans. Am. Soc. Met.,59, No. 11, 374–383 (1966).
J. J. Gilman, “Propensity for cleavage and surface energy of bcc metallic crystals,” in: Fracture of Solids [Russian translation], Metallurgiya, Moscow (1967), pp. 336–343.
R. Ayres and D. F. Stein, “A dislocation dynamics approach to prediction of cleavage planes in B.C.C. metals,” Acta Metall.,19, No. 8, 789–794 (1971).
A. R. Verma and P. Krishna, Polymorphism and Polytypism in Crystals, Wiley (1966).
D. B. Holt, “Mismatch dislocations in semiconductors,” in: Defects in Semiconductor Crystals [Russian translation], Mir, Moscow (1969), pp. 140–144.
G. A. Wolf, “Investigation of cleavability,” in: AIIIBV Semiconductor Compounds [Russian translation], Metallurgiya, Moscow (1967), pp. 56–75.
T. I. Voznesenskaya, N. N. Grigor'ev, and M. F. Fok, “Factors determining the decoration surface structure of ZnS-type crystals,” Kristallografiya,21, No. 1, 178–183 (1976).
V. D. Kuznetsov, Surface Energy of Solids [in Russian], Gosizdat. Tekhn.-Teor. Lit., Moscow (1954).
G. A. Wolf and J. D. Broder, “Microcleavage bonding character and surface structure in materials with tetrahedral coordination,” Acta Cryst.,12, No. 4, 313–323 (1959).
G. V. Berezhkova, “Cleavability ofα-Al2O3 crystals,” Kristallografiya,17, No. 2, 431–432 (1972).
S. M. Wiederhorn, “Fracture of sapphire,” J. Am. Ceram. Soc.,52, No. 9, 485–491 (1969).
V. M. Finkel', Physics of Fracture [in Russian], Metallurgiya, Moscow (1970).
L. I. Dergachenko, G. M. Zaretskaya, et al., Mineralogy of Silicon Carbide [in Russian], Nauka, Moscow (1975).
O. A. Fedorchenko and L. V. Atroshenko, “Microplasticity and microbrittleness of AIIBVI type single crystals at room temperature,” in: Single Crystals and Engineering [in Russian], Vol. 7 (1972), pp. 3–11.
L. Van Fleck, Theoretical and Applied Materials Science [Russian translation], Atomizdat, Moscow (1975).
V. V. Kukol', E. E. Lakin, et al., “Effect of alloying on the structure of and stacking fault concentration in melt-grown ZnS single crystals,” in: Single Crystals and Engineering [in Russian], Vol. 2 (1973), pp. 82–89.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 6(186), pp. 93–98, June, 1978.
Rights and permissions
About this article
Cite this article
Pilyankevich, A.N., Oleinik, G.S. Fracture characteristics of twinned crystals of silicon carbide of the cubic modification. Powder Metall Met Ceram 17, 483–487 (1978). https://doi.org/10.1007/BF00795809
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795809