Literature cited
I. D. Radomysel'skii, G. G. Serdyuk, E. L. Pechentkovskii, and S. G. Napara-Volgina, “Production of constructional engineering components from porous preforms by hot forging,” Poroshk. Metall., No. 12, 46–51 (1979).
A. K. Grabchak, V. N. Klevtsov, I. D. Martyukhin, et al., “Physicomechanical properties of parts in low-alloy steels produced by hot forging of porous blanks,” in: Hot Pressing in Powder Metallurgy [in Russian], United Scientific-Technical Press, Institute of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1977), pp. 19–23.
A. K. Grabchak, V. N. Klevtsov, I. D. Martyukhin, et al., “Properties of P/M steels produced by hot forging of porous blanks,” in: P/M Constructional Materials [in Russian], United Scientific-Technical Press, Institute of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1980), pp. 63–66.
A. P. Gulyaev, Heat Treatment of Steel [in Russian], Mashgiz, Moscow (1953).
Yu. M. Lakhtin and A. G. Rakhshtadt (eds.), Heat Treatment in Machine Construction [in Russian], Mashinostroenie, Moscow (1980).
I. A. Moskalenko, P. N. Ostrik, I. D. Radomysel'skii, et al., “Sintering of parts from powders in protective atmospheres with carbon potential regulation,” in: Sintered Con-structural Materials [in Russian], United Scientific-Technical Press, Institute of Materials Science, Academy of Sciences of the Ukrainian SSR, Kiev (1976), pp. 33–42.
Author information
Authors and Affiliations
Additional information
Translated from Poroshkovaya Metallurgiya, No. 4(244), pp. 68–71, April, 1983.
Rights and permissions
About this article
Cite this article
Radomysel'skii, I.D., Klevtsov, V.N., Napara-Volgina, S.G. et al. Structure and properties of P/M low-alloy steels produced by hot forging. Powder Metall Met Ceram 22, 302–304 (1983). https://doi.org/10.1007/BF00795608
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00795608